Gate Company in Marco — On-Site in 60 Minutes, Fixed the Same Day

Same-day gate service with the price agreed before we start. Licensed and insured engineers covering repairs, operators and access control across the whole area.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Call Now — 24/7 Dispatch

We answer around the clock

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Marco, FL

Gate installation in Marco, FL means building for salt air, hurricane season, and HOA design review boards that read every finish spec twice. Most of the island’s homes date from the 1970s through the 2000s, and nearly every canal-front or pool-deck property carries some form of gated entry, so we plan every install around corrosion resistance and matched aesthetics from day one. Courtyard Gate Repair has served Marco since 2017, and our team handles the full job: site prep, gate fabrication or sourcing, operator mounting, wiring, safety edges, and final adjustment. Call (844) 791-3898 for a free estimate on a new automatic driveway gate or a replacement for one that’s finally surrendered to the Gulf. We quote the full price before any work starts.

Call (844) 791-3898

Why Marco Homes Are Different

Marco’s housing stock is overwhelmingly single-family homes, villas, and low-rise condo complexes built between the 1970s and early 2000s. That era of construction means most gate posts and footings were poured long before today’s heavier automated operators existed, so a surprising share of our Marco installation work starts with strengthening or replacing what’s underground before we ever mount an arm or a motor. The island’s canal-front and near-beach lots are dense with decorative aluminum and ornamental iron gates, chosen for their resistance to the Gulf’s salt-laden air, but that same air eats fasteners, hinges, and keypad housings at a pace you won’t see inland.

The subtropical climate here punishes gate equipment in three ways at once: humidity corrodes electrical contacts, salt air attacks finishes and fasteners, and hurricane-season winds and surge finish off anything already weakened. Powder coat fades and chalks within a few seasons on Marco if it wasn’t applied for marine exposure. And unlike most mainland communities, Marco’s HOA and condo associations enforce strict design-review rules across nearly every development, so repair or replacement work often has to match original finishes and profiles rather than simply restore function. A working gate that fails the association’s aesthetic review is still a failed job. That reality shapes how we spec materials, fasteners, and paint on every Marco project.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Our Main Marco Services

Marco homeowners call us most often for two things: a gate that won’t open or close properly, and an automated system that stopped responding to the remote, keypad, or vehicle sensor. Both jobs run deeper here than they do inland because of the salt and the storm exposure.

Gate Repair in Marco

Mechanical gate repair in Marco usually means hinges seized with corrosion, a sagging leaf that drags on the pavers, a latch that no longer aligns, or a post that’s shifted in sandy canal-side soil. We carry marine-grade hinges, rollers, and fasteners that hold up better in the island’s salt air than the hardware originally installed decades ago. Because most Marco gates are aluminum or ornamental iron, we’re also set up to weld, re-finish, and match paint so the repair passes HOA review. You don’t need a general contractor for this, and you don’t need to replace a gate that can be brought back true. Read the full breakdown at Gate Repair in Marco.

Gate Repair in Marco

Electric Gate Repair in Marco

Electric gate repair in Marco is as much about humidity and salt as it is about boards and motors. We see corroded limit switches, keypads that fail after a season of direct Gulf exposure, control boards shorted by surge after a storm, and battery backups that never got maintained. Our technicians work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the diagnosis targets the actual failed component, not a sales pitch to swap brands. On Marco we always check the grounding and surge protection, because a new board installed without them is just the next failure waiting for the next storm. Details are at Electric Gate Repair in Marco.

Electric Gate Repair in Marco
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 791-3898

What happens when you call

  1. 1
    A real person answersNo phone trees — you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Gate Installation in Marco

Gate Installation in Marco

New gate installation on Marco is a corrosion-budgeting exercise disguised as a construction project. Homes built in the 1970s through 2000s often have footings and posts that predate today’s automated operators, so we frequently rebuild the foundation before hanging anything. Salt air from the Gulf and the canals dictates material choices: marine-grade aluminum, powder coat rated for coastal exposure, stainless or coated fasteners, and operators housed for humidity. We also stage every Marco install to satisfy HOA design-review requirements, because the island’s associations expect the new gate to look like it belongs, not just like it works. For a full walk-through of what’s involved, see Gate Installation.

Automatic Gate Installation

Signs you need it

You’re pushing or pulling a heavy gate by hand every time you come and go, or the existing mechanical gate sits across a driveway you’d rather secure with an operator.

What it costs in Marco

Automatic gate installation in Marco typically runs $6,500 to $9,500 depending on the operator type, gate material, and whether we’re reinforcing existing posts or pouring new footings.

How we do it

We survey the site and soil, set or reinforce posts, build or mount the gate, install the operator and safety edges, complete the low-voltage wiring, program remotes and keypads, and test the full cycle including obstruction reversal.

Driveway Gate Installation

Signs you need it

Your driveway entry is open, a gate is failing from salt corrosion, or you want to add security and curb appeal to a canal-front or near-beach lot.

What it costs in Marco

Driveway gate installation in Marco typically falls between $4,500 and $8,000 for a standard single or double swing gate with manual operation, with automation adding operator and wiring costs on top.

How we do it

We measure the drive width, check gate swing clearance, set posts in concrete rated for Marco’s soil, hang and align the leaves, then install hardware and finishes that meet the local HOA’s material and color standards.

Sliding Gate Installation

Signs you need it

Your driveway slopes toward the street, your gate swings into a busy lane, or you want a single panel that slides parallel to the property line instead of arcing into the yard.

What it costs in Marco

Sliding gate installation in Marco generally runs $5,500 to $9,000, with the range driven by track length, gate weight, and whether the ground needs leveling or a new concrete track bed on a canal-side lot.

How we do it

We set the track or cantilever supports, build or source the panel to your lot’s width, install the rollers and guides, add the operator and safety sensors if requested, and adjust the travel so it opens and closes without binding.

What Gate Installation Costs in Marco

Item Typical range in Marco
Automatic gate installation $6,500 – $9,500
Driveway gate installation $4,500 – $8,000
Sliding gate installation $5,500 – $9,000

Corrosion-resistant hardware, marine-grade finishes, and the extra concrete work Marco’s sandy soil and older footings often require are the main things that push a job toward the higher end. We quote the full price before any work starts, so the number we agree on is the number on the invoice.

Do I need HOA approval before installing a gate on Marco?

Most Marco HOAs and condo associations require design-review approval before a new gate goes in, especially for anything visible from the street or a shared canal. We can prepare the finish, material, and dimension details your association will ask for, and we build to those specs from the first day.

Can you install an automatic gate on a property with older posts and footings?

Yes. Many Marco homes built between the 1970s and 2000s have footings that weren’t sized for today’s operators, so we regularly reinforce or repour posts before mounting the gate and motor. This is part of the install, not an afterthought, and it’s included in the quote we give you up front.

Brands We Service in Marco

Marco’s gate motors are a mix of coastal-grade residential units and higher-cycle commercial systems. We work on Viking and Ghost Controls operators on estate driveways, DoorKing on light-commercial and condo entries, and Elite on gates that see a lot of daily cycles. Our vans carry the boards, remotes, and safety parts for these brands, which keeps most Marco repairs to a single visit. See our brands for the full picture.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Marco, FL

Service Typical range in Marco
Automatic gate installation $6,500 – $9,500
Driveway gate installation $4,500 – $8,000
Sliding gate installation $5,500 – $9,000
Gate repair (mechanical) $275 – $650
Electric gate repair $350 – $950
Operator replacement $950 – $2,800
Hinge replacement $225 – $525
Keypad replacement $225 – $550
Gate sensor / photo eye repair $195 – $425

The salt air, canal-side soil conditions, and HOA finish requirements on Marco push materials and labor toward the upper end of these ranges more often than inland jobs. Whatever the job, we quote the full price before any work starts. You’ll know the cost of the repair or install before we touch a single fastener.

Neighborhoods We Serve in Marco

We work across all of Marco’s 34146 ZIP code, from the canal-front estates near the Jolley Bridge to the villa communities and condo clusters along Collier Boulevard. Our technicians know which neighborhoods have the strictest architectural review boards and which lots sit closest to the Gulf’s worst salt exposure, because both details change how a job should be spec’d.

  • Caxambas
  • Hideaway Beach
  • Marco Shores
  • Olde Marco
  • Tigertail

Most Marco repair calls can be scheduled within a few business days, and we carry enough marine-grade hardware on the trucks to handle the common corrosion failures in a single visit.

Service Area – Cities Near Marco

Courtyard Gate Repair’s service area covers Marco and the surrounding Collier County communities, including Marco Island, FL just across the bridges. We also serve Lely Resort, FL, Verona Walk, FL, and Lely, FL for homeowners and property managers who need the same coastal-grade gate expertise without the island commute.

Serving Marco, FL — Our Local Coverage Area

We’re based in the Marco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs About Gate Company in Marco

Ready to get started? Free estimates · same-day response in Marco
Call (844) 791-3898

What happens when you call

  1. 1
    A real person answersNo phone trees — talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Marco Customers Say

★★★★★ 4.9 from 7+ reviews

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

— Rachel Miller

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

— Diego Rodriguez

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."

— Grace Kim

How It Works in Marco

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote — no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Marco — typically within 30–60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Marco — we'll get back to you fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and consent to receive communications via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch