Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Arcadia
If your gate won’t open, sags in the middle, or stopped responding to the remote after a storm, we can help. Courtyard Gate Repair has been fixing gates across Arcadia, FL, from the historic downtown grid to the ranch land east of US-17. We’re a gate-only shop, so when you call (844) 791-3898, you get a technician who knows operators, hinges, and control boards, not someone who also does drywall and pools. Most Arcadia calls are from rural properties where a gate is the first line of security and livestock containment, and we treat every one of them as urgent.
Why Courtyard Gate Repair Is Arcadia’s Preferred Gate Repair Company
Arcadia customers call us because we show up knowing what we’re looking at. The gate on a 1950s block home near Magnolia Street is a different job from a 16-foot ranch gate on a sandy drive off SR-70, and we’ve worked both. Noel Braddock leads a team that’s trained on nine operator brands, so we don’t scratch our heads when a Ghost Controls board fails or a Viking arm strips. We’re gate specialists, not generalists. That’s the whole pitch.
What Arcadia property owners tell us they value most is honest diagnosis. On an older gate, the problem is rarely one thing. A summer storm takes out a control board, but the gate was already dragging because its hinge post settled in sandy soil. We find the real failure, explain what you can wait on and what you shouldn’t, and give you the number before any work starts.
Styles & brands we work with
Wrought Iron Gate Repair in Arcadia
Wrought iron gate repair in Arcadia usually means fixing a sag and the post that let it happen. A heavy ornamental gate hanging on a wooden or pipe post is common in this area, and after enough wet-season rain, the post shifts a few degrees. The gate drops. You see a gap at the top latch side and a drag mark in the dirt. We correct the sag, rebuild or reset the post, and often add a deeper footing because the sandy soil here doesn’t hold shallow concrete the way clay would.
Costs in Arcadia typically run $280 to $550 for a standard wrought iron sag correction with post stabilization. If the gate has ornamental scrollwork that’s cracked or rusted through, we weld and grind those sections back to profile. Where the post is rotted at ground level on a rural driveway, the job runs higher, $450 to $800, because we’re cutting the old post below grade, setting a new one, and fabricating hinge plates. On in-town Arcadia gates with masonry piers, the fix is usually hinge re-seating rather than post replacement.
Post Re-Set and Strike Alignment
We see Arcadia gates where the post itself is fine but the strike plate has moved a quarter inch, so the latch won’t catch. That’s usually a $120 to $180 fix. If the post has shifted, we dig, plumb, and re-set it with concrete that extends below the sand layer.
Scrollwork and Weld Repair
Rust is the other Arcadia constant. Humidity and afternoon rain work on any scratch in the powder coat. We grind the rust back, weld in new material where the section is thin, and match the finish as closely as the age of the gate allows. On a decorative gate off Magnolia Street, that’s a weekend job. On a working ranch gate, it’s a same-visit repair.
Metal Gate Repair in Arcadia
Metal gate repair in Arcadia covers everything from galvanized farm gates to aluminum driveway gates. The most common call is a gate that won’t swing true because the driveway has washed out underneath it. Sandy, unpaved drives shift after heavy rain, and the gate posts move with the ground. We re-level the gate, rebuild the hinge geometry, and where the operator is working against the misalignment, we fix that too, because a motor straining against a sagged gate burns out early.
Typical metal gate repair in Arcadia runs $180 to $420 for realignment and hinge work. Frame welding on a bent tube gate adds another $100 to $250 depending on the damage. On a ranch gate off SR-70 that’s been hit by a tractor or a truck, we’re usually looking at $350 to $650 for pull-back, re-weld, and re-hang. Those are the numbers we quote before we start.
Aluminum Driveway Gate Service
Aluminum doesn’t rust, but it bends. Arcadia homes with aluminum driveway gates get wind damage and the occasional vehicle contact. We straighten or replace top and bottom rails, rebuild hinge points, and get the gate tracking level again.
Ranch and Pasture Gate Refitting
On working properties, a gate can’t just look right, it has to hold livestock and open from a truck seat. We weld on heavy-duty hinges, build catch posts that don’t pull out, and make sure the gate swings free after the ground dries out and shifts again.
Trusted Brands We Service in Arcadia
We service Viking, Ghost Controls, DoorKing, and Elite operators, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That matters in Arcadia because rural properties here run everything from entry-level Ghost Controls openers on residential drives to DoorKing commercial systems at agricultural businesses and small commercial lots. We stock common boards, remotes, and photocells for these brands, so a repair in Arcadia doesn’t wait on a week of shipping. Your brand, our expertise. We repair what others replace.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Arcadia Homes
- Lightning-fried control boards. Flat, open ranch country means Arcadia gates are among the tallest objects on a long driveway. A summer storm puts a surge through the operator, and the board quits. We replace protection and the board together so the next storm doesn’t do it again.
- Sandy soil shifting hinge posts. Unpaved driveways wash out in heavy rain, posts lean, and swing gates start dragging. We re-set the post deeper than the original, because a shallow repair in this soil fails inside a year.
- Wooden post rot at ground level. Older Arcadia gates were often hung on 4×4 or 6×6 wood posts. Florida humidity rots them just below grade. We replace with steel or re-set in concrete, depending on the gate weight.
- Legacy operators with no safety features. Ranch gates installed twenty years ago often have no photocells, no safety edge, and a board that predates current fault codes. We can retrofit safety sensors on most of them, and honestly tell you when the operator is past saving.
Pricing for Gate Repair in Arcadia, FL
Gate repair in Arcadia runs a real range. A stuck remote or fried photocell is usually $90 to $180. A sagging wrought iron gate with post work lands between $280 and $550. Control board replacement on brands like DoorKing or Viking runs $340 to $700 depending on the board and the operator. Full operator replacement starts around $800 for residential and goes up for commercial systems. We quote the exact number before any work begins, in writing, and that’s the number you pay. Call (844) 791-3898 for a free estimate on your Arcadia property.
We Also Serve Cities Near Arcadia
Our Gate Repair team covers all of DeSoto County. Beyond Arcadia, we regularly work in Nocatee, Southeast Arcadia, Harbour Heights, and Cleveland. If you’re on a rural lot off SR-70 or a side street near the Peace River, we’re already in the area.
Serving Arcadia, FL — Our Local Coverage Area
We’re based in the Arcadia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arcadia
Unplug the operator for two minutes, check the breaker, and try it again. If it still won’t respond or cycles wrong, you likely have a surge-damaged board, common in Arcadia after lightning storms. We test the board first and only replace it if the failure is confirmed. A diagnosis call runs $65 to $95, credited toward the repair.
Yes, that’s one of the most common wrought iron repairs we do in Arcadia. The sag is almost always a hinge or post problem, so we correct the frame geometry, re-hang the gate, and reinforce the post if the sandy soil has let it move. If you see the gate dragging at the latch side, call (844) 791-3898 before the operator burns itself out fighting the misalignment.
We service nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’re brand-agnostic, so we fix the system you have rather than pushing you to replace a good operator because we don’t know how to work on it.
A gate on a sandy, unpaved Arcadia driveway will shift as the ground washes out under the posts. The fix is deeper post footings that reach below the sand layer, plus re-grading around the posts to redirect water. It’s a real repair, not a maintenance tweak. Call us after the rain when it’s misbehaving, and we can see the exact post movement.
Usually yes, especially on an automated gate. A 15-year-old operator without photocells or a safety edge creates a genuine risk to people, animals, and vehicles. Retrofitting sensors on most older operators runs $250 to $500 in Arcadia. If the board can’t support modern sensors, we’ll tell you that too, and give you the replacement number instead.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Arcadia and greater DeSoto County.