Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Arcadia, FL | Courtyard Gate Repair
We repair Ghost Controls gate operators across Arcadia, FL, and the surrounding ranch country of DeSoto County, and we also handle Ghost Controls repair in Southeast Arcadia. Most of the Ghost Controls units we service here are mounted on pipe or wooden posts set in sandy soil, which means the operator itself is often fine while the ground underneath it has shifted. That changes how we diagnose, and it’s why our Ghost Controls work in Arcadia starts with checking post plumb and gate swing before we ever open the operator housing. If your gate is dragging, reversing mid-cycle, or dead after a storm, call (844) 791-3898 for a straight answer and a free estimate.
Why Arcadia Residents Choose Us for Ghost Controls Service
Our Ghost Controls sales & service work comes from field experience, not a dealership agreement. We’ve opened enough Ghost Controls control boards to know which failures are repairable and which ones aren’t. We’re an independent company, and that independence means we don’t have a quota pushing us toward replacement when a $70 relay or a corroded battery terminal is the real culprit.
Noel Braddock, owner of Courtyard Gate Repair, grew up around Fort Myers and spent years working through every gate type Southwest Florida throws at a technician before starting this company. He’d watched too many Arcadia homeowners get vague estimates for problems that had clear, fixable causes. So we built a gate-only business that stocks genuine Ghost Controls boards, arms, and battery harnesses, and that shows up with a transit and a post-pounder on every rural call because in Arcadia, the ground is usually the first suspect.
We’re gate specialists, not generalists. Whether it’s a Ghost Controls AXS single-swing arm or a TSS dual-swing controller, we know your system.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Arcadia
- Lightning-surge damage to the control board. Summer thunderstorms roll through Arcadia constantly, and a nearby strike on a rural power line or a fence charger can send a surge straight into the operator. We see boards that look fine on the outside but won’t respond, or open the gate on their own. We test the board before recommending replacement.
- Battery and solar charge failure. Ghost Controls solar kits work well, but the humid subtropical climate ages lead-acid batteries fast. Sulfation builds up during long hot summers, and the 10W panel struggles to keep up during cloudy stretches. We test the whole charging circuit, not just the battery.
- Limit-switch drift and arm binding. This is the Arcadia signature problem. Swing gates on sandy soil settle, posts lean, and the gate drifts out of plumb. The operator’s limit switches work harder, the arm binds, and the gate reverses halfway through its cycle. We re-level before we adjust limits, because adjusting limits on an unlevel gate just moves the problem.
- Keypad and remote receiver failures. Exposed rural driveway entries mean sun, rain, and humidity hit keypads and receivers all year. Moisture gets inside, and power surges finish the job. We stock quality replacements and seal the housing properly on reinstallation.
- Phantom opening or no-response conditions. When a Ghost Controls gate opens by itself or ignores every remote, the cause is usually a compromised control board or a failing receiver module. A gate doesn’t fail all at once, it tells you what’s coming if you know what to look for. We listen to the pattern before we start swapping parts.
Ghost Controls Service in Arcadia: What Local Conditions Mean for Your Equipment
Many Ghost Controls swing gates in Arcadia are mounted on pipe or wooden posts driven into sandy soil. The soil here drains fast, but it shifts. A dry season shrinks it, a wet summer swells it, and a hard rain can wash out a driveway edge enough to throw a post a degree or two out of plumb. What that means for a Ghost Controls owner is a gate that drags, binds, or reverses mid-cycle while the operator itself is still perfectly functional. So our techs routinely bring a transit and a post-pounder to every call, not just a parts bag. Ground movement, not operator wear, is often the root cause. For Ghost Controls repair in Harbour Heights and nearby areas, we’ve seen similar issues: on a ranch entrance off SR-70 east of town, a Ghost Controls dual-swing operator had stopped responding after a July lightning storm. Our crew found a fried control board and a sulfated battery in the solar kit, replaced both with OEM parts, and re-leveled the sagging tube gate on its pipe posts. The gate was cycling smoothly on remote and keypad before we left, with the solar panel repositioned for better morning charge. That’s a typical Arcadia repair: two electrical failures and one structural one, all addressed in a single visit because we came prepared for all three.
Ghost Controls Models & Products We Service in Arcadia
We service the full Ghost Controls residential and ranch lineup: Heavy-Duty Single Swing (AXS series), Dual Swing (TSS series), Solar-Efficient Kits with the 10W panel, and Tube Gate Operators used on farm and ranch tube gates throughout Arcadia. We also provide Ghost Controls repair in Cleveland. We stock genuine Ghost Controls control boards, arms, and battery harnesses. Where a quality aftermarket battery or receiver meets or exceeds OEM specs for the application, we use it and tell you that’s what we’re doing. Transparency on parts is part of the job. For Arcadia, we keep common Ghost Controls boards and batteries on the truck because ranch gates are often operational gates, not decorative ones; a gate down means cattle movement and equipment access problems, not just an open driveway.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Arcadia
What you’ll pay depends on what we find. A Ghost Controls service call in Arcadia typically runs somewhere between $85 and $185 for diagnosis, and that diagnostic fee is credited toward the repair when you approve the work. A replacement aftermarket battery often lands in the $45 to $110 range. A new Ghost Controls control board, with labor, commonly runs $220 to $400. A full operator replacement, when it’s the only sensible option, can range from $450 to $950 installed depending on the model, the gate’s weight, and the condition of the posts and hinges. We quote a firm price before any work begins, so the invoice matches the number you approved. Call (844) 791-3898 for a free estimate and an honest read on your system.
Serving Arcadia, FL — Our Local Coverage Area
We’re based in the Arcadia area and know this community well, and we also offer Nocatee Ghost Controls service. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Arcadia
The control board is usually the first thing to go. A nearby lightning strike sends a surge through the power line or the fence, and the board takes the hit even when the rest of the operator looks fine. We test the board, the transformer, and the battery before quoting a repair. Call (844) 791-3898 and we’ll walk through what you’re seeing.
Yes. Wooden posts in Arcadia’s sandy soil rot below grade and shift in the wet season. We re-level the gate and posts first, then adjust the Ghost Controls arms and limit switches. If the post is too far gone, we’ll say so plainly and work with you on a fix that lasts.
Phantom opening usually points to a failing control board or receiver. Stopping halfway usually points to limit-switch drift, often caused by a shifting post or a bound arm. A gate doesn’t fail all at once, it tells you what’s coming if you know what to look for. Call us at (844) 791-3898 and describe the pattern; we can usually narrow the cause over the phone.
We do. Many Arcadia properties run Ghost Controls on solar, and we upgrade batteries, reposition panels, and rewire charging circuits as part of our repair scope. If you want a battery backup added to an AC-powered operator, we’ll size it to your gate’s duty cycle and install it so the gate keeps cycling through outages and storm season.
No. We’re an independent gate repair company. That means our Ghost Controls expertise comes from field repairs across DeSoto County, not from a dealership arrangement. It also means we recommend repair when the board or drive components are serviceable, and replacement only when corrosion or motor winding failure makes repair uneconomical.
Service Areas Near Arcadia
We serve Arcadia and the surrounding communities across DeSoto County, including the full Arcadia service area. Our Ghost Controls techs also cover Ghost Controls service in Marco and Ghost Controls service in South Venice when ranch and residential calls take us toward the coast.
Book Your Ghost Controls Service in Arcadia Today
Call Courtyard Gate Repair at (844) 791-3898 for a free estimate on your Ghost Controls gate repair in Arcadia. We arrive with the parts, the transit, and the post-pounder. You get a diagnosis you can trust and a price agreed before any work starts.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Arcadia and DeSoto County.