Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Venice, FL
Gate installation in Venice typically costs $1,800 – $7,500 for a complete residential driveway gate with operator, depending on whether you’re replacing a corroded single-swing gate in a 1970s villa community or putting in a new sliding gate at Stoneybrook or Grand Palm. Courtyard Gate Repair has served Venice since 2017, and the jobs here have a rhythm unlike anywhere else on the Gulf Coast: seasonal snowbirds leave gates dormant for five or six months, salt air from the Intracoastal works on every hinge and board, and HOA architectural committees means color and style decisions aren’t yours alone. If you’re weighing a new gate or trying to decide whether your existing one is worth saving, call us at (844) 791-3898 and we’ll give you an honest read before you spend a dollar.
Why Venice Homes Are Different
Venice’s housing stock sets the work apart. Most of our installation and repair calls come from mid-century ranch homes and 1970s – 90s villas inside deed-restricted communities, along with newer large developments like Stoneybrook and Grand Palm. That means residential driveway gates and community association gates, not industrial or high-security installations. The salt air here is the constant variable. Gulf and Intracoastal salt spray accelerates corrosion on steel hinges, operator housings, and electrical connections. Afternoon thunderstorms roll through most of the summer, and hurricane-season wind loads push against every gate panel, finding weak points in posts and hinges. What really matters in Venice, though, is the seasonal cycle. We regularly see gates that sat untouched from April to October, seized at the hinge or with boards that won’t power up because corrosion crept in while no one was watching. The repair is less about fixing a sudden failure and more about reviving a system that’s been slowly degrading in the salt air. And in many of Venice’s gated and deed-restricted communities, any visible hardware change, hinge style, or paint color has to pass architectural review, so the work has to match the HOA’s palette or it gets redone on your dime.
Styles & brands we work with
Our Main Venice Services
Most homeowners in Venice call us for one of two things: a gate that physically won’t open or close properly, or an electric operator that’s stopped responding. Here’s how each plays out in this part of Sarasota County.
Gate Repair in Venice
A driveway gate that drags, sags, or won’t latch is usually a mechanical problem: hinges, posts, rollers, or the gate frame itself. In Venice, the salt air turns minor hinge wear into a seized, corroded mess faster than inland. Our Gate Repair in Venice service covers manual and automated gates, from re-welding a broken hinge plate to realigning a gate that the afternoon winds have pulled out of square. We start by finding the root cause, not just lubricating the symptom.
Electric Gate Repair in Venice
When the operator runs but the gate won’t move, or the gate moves but the keypad stops working, the problem is in the electrical system: boards, motors, limit switches, sensors, or the low-voltage wiring running out to the gate. Corrosion from Gulf salt air is a known killer of boards and connections in Venice. Our Electric Gate Repair in Venice service diagnoses the real electrical fault rather than defaulting to replacing the whole operator. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Venice
Gate installation in Venice starts with the same question every time: what’s the gate going to face out here? The salt air from the Gulf and Intracoastal means materials and coatings matter more than they would inland, and hurricane-season wind loads mean posts have to be deep enough and braces strong enough to hold a swinging panel through a summer squall. Most of our installations are residential driveway gates in communities like Stoneybrook, Grand Palm, and the older villa neighborhoods, where HOA architectural review often dictates the gate’s color and hardware style before we even break ground. For a deeper look at the service itself, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate by hand, or you have a manual gate and want the security and convenience of a keypad or remote-operated entry.
What it costs in Venice
Automatic gate installation in Venice typically runs $2,500 – $6,000 for a single residential driveway gate with operator, depending on the gate’s weight, length, and whether we’re adding a keypad or intercom.
How we do it
We assess the gate’s weight and swing or slide path, install reinforced hinges or a roller track, mount the operator on a concrete pad or post, and run low-voltage wiring to the keypad, safety edges, and a transformer.
Driveway Gate Installation
Signs you need it
Your current gate is sagging, rusted through, or was never built to handle Venice’s salt air and wind loads, and repairing it piecemeal is costing more than a proper replacement.
What it costs in Venice
A new residential driveway gate in Venice runs $1,800 – $4,500 for the gate and posts, with the operator and automation adding $800 – $2,500 depending on the system you choose.
How we do it
We remove the old gate and posts, set new galvanized or powder-coated steel posts in concrete below the frost line, hang and square the gate, then install the operator, keypad, and safety sensors if you’re automating it.
What Gate Installation Costs in Venice
| Item | Typical range in Venice |
|---|---|
| Residential driveway gate (manual) | $1,800 – $4,500 |
| Automatic gate operator | $800 – $2,500 |
| Full automatic gate system with keypad | $2,500 – $6,000 |
Prices in Venice trend toward the middle and upper ends of these ranges when salt-air corrosion protection, HOA-approved finishes, or hurricane-rated post anchoring are required. You’ll always get a written quote before any work starts, and you’ll agree to that price before we order a single part.
How long does gate installation take in Venice?
Most residential driveway gate installations in Venice take one to two days, but HOA architectural approval can add a week or more to the timeline if your community’s committee needs to review colors and hardware before work begins.
Do I need HOA approval for a new gate in Venice?
In many of Venice’s deed-restricted communities, yes. Architectural review committees often govern gate color, style, and even hardware finish. We can match your HOA’s approved palette and work with you on the submission details, but the approval itself comes from your association.
Brands We Service in Venice
We service DoorKing, Elite, Mighty Mule, and LiftMaster systems throughout Venice, and we keep common boards, limit switches, and safety sensors for those lines stocked locally so your repair doesn’t stall waiting on a part. Your brand, our expertise. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Venice, FL
| Service | Typical range in Venice |
|---|---|
| Gate repair (mechanical, hinge, align) | $150 – $500 |
| Electric gate diagnostic | $75 – $150 |
| Operator motor replacement | $400 – $1,200 |
| Control board replacement | $300 – $900 |
| Sensor or safety edge replacement | $200 – $600 |
| Keypad or intercom replacement | $250 – $800 |
| Gate panel replacement (sectional) | $500 – $1,800 |
| Manual driveway gate installation | $1,800 – $4,500 |
| Automatic gate operator installation | $800 – $2,500 |
| Full automatic gate system with keypad | $2,500 – $6,000 |
What pushes a price up in Venice is almost always corrosion and wind. A hinge that would be a simple replacement inland often means cutting out rusted fasteners and re-welding the post here. Salt-air exposure also shortens the life of boards and sensors, so a repair that starts as a $300 board swap can become a $900 job if the corrosion has spread to the connectors and wiring. Every quote is agreed before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Venice
We cover the full Venice area, including the 34284, 34285, 34292, and 34293 ZIP codes. Residential gates, community association gates, and light-commercial entry systems are all in our daily work. We typically reach most Venice addresses the same day for repair calls.
- Stoneybrook
- Grand Palm
- Venice East
- Venice Gardens
- South Venice
Service Area – Cities Near Venice
Our Venice crew also covers the surrounding communities along the Gulf and Intracoastal. You’ll find us regularly in South Venice, FL, Venice Gardens, FL, Laurel, FL, and Nokomis, FL. If you’re just outside Venice proper, call (844) 791-3898 and we’ll confirm we can get to you.
Serving Venice, FL — Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Venice
For a gate that’s stuck open and leaving your property unsecured, we typically reach most Venice addresses the same day. If the gate is stuck closed and you need to get a vehicle in or out, call us at (844) 791-3898 and we’ll prioritize getting you moving again.
Permit requirements vary by community and scope. A like-for-like gate replacement on existing posts usually doesn’t need one, but new posts, electrical runs, or a new operator often do. Your HOA’s architectural review committee may have its own approval process that runs parallel to any city permit. We can talk you through what your specific Venice neighborhood requires.
Yes. We work inside many of Venice’s deed-restricted and gated communities, including residential driveway gates and the community entry gates that see hundreds of open and close cycles a day. Brand-agnostic means we can service whatever operator the community already has, from DoorKing to LiftMaster, without pushing a replacement you don’t need.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Venice Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Rafael Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Paul Schaefer"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Danielle Quinn