Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Memphis, FL
Gate installation in Memphis, FL runs $800 to $3,200 for a typical residential driveway gate, depending on whether it’s a single swing, a slide, or an automated system with an operator. Most of the work we do here serves the newer master-planned and riverfront communities in the 34221 ZIP, where aluminum gates and privacy fencing sit close to the Manatee River and take a beating from salt air. We’re Courtyard Gate Repair, and we’ve served Memphis since 2017 as gate specialists, not generalists. If you’re planning a new gate or replacing one that rusted out, call (844) 791-3898 for a free estimate.
Why Memphis Homes Are Different
Memphis sits on the Manatee River just east of Palmetto, which changes what a gate goes through compared to an inland Florida town. Salt-laden Gulf air moves up the river and settles on metal, so steel hinges rust faster here than they would ten miles east. Intense summer sun bakes operator housings and degrades plastic gears and limit switches over a few seasons. Then come the afternoon thunderstorms, which dump rain and drive wind-driven debris into tracks and pickets. A gate that might last twelve years inland often needs real attention in six or seven here.
The housing stock matters too. The 34221 area is dominated by newer Florida-style single-family homes in master-planned and riverfront communities, with driveway gates and pool-enclosure gates that pair with lift operators. There are also older small-lot homes near the river, where a gate may sit on a wood post that’s been soaking up river humidity for decades. Many of the newer communities also have HOA setback and appearance rules that dictate gate style, color, and repair materials, so a replacement isn’t always a free choice. It has to match what the board approved. We know how to work within that, and we lean toward marine-grade or aluminum hardware on every Memphis job because of the salt air.
Styles & brands we work with
Our Main Memphis Services
Memphis homeowners and property managers call us most often about two things: a gate that won’t open or close reliably, and an electric system that has stopped responding. Here’s what each involves here.
Gate Repair in Memphis
Gate repair in Memphis is as much about corrosion and storm damage as it is about broken latches. The river air rusts hinges and hardware, and the summer storms bend tracks and knock gates out of alignment. We service manual and automated gates, diagnose the real failure rather than defaulting to a full replacement, and keep repairs on brand-agnostic ground. Whether it’s a bent slide track in a riverfront community or a rusted hinge on an older small-lot home, we repair what others replace. See our dedicated Gate Repair in Memphis page for a full breakdown of common failures and pricing.
Electric Gate Repair in Memphis
Electric gate repair in Memphis has a specific pattern: salt air shortens the life of boards, motors, and sensors, and the summer storm season produces a spike in operator failures. We train on nine major operator brands including LiftMaster, DoorKing, Elite, and Mighty Mule, so when a FAAC board fails or a Linear limit switch stops reading, we know your system. The repair is about finding the exact component that failed, not selling a new operator. Read the detailed Electric Gate Repair in Memphis page for diagnosis details and cost ranges.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Memphis
Gate installation in Memphis is a different job than it is inland because of the salt air and the HOA-driven style rules in the master-planned communities. A new gate here should be aluminum or marine-grade steel, mounted on posts set deep enough to survive river wind, with hardware that won’t rust shut in two seasons. We handle the full job: site measure, post setting, gate build and hang, operator installation, and safety tuning. For a broader look at our installation work, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You have a driveway or courtyard gate you’re tired of opening by hand, or an existing operator that has failed and you want a fresh system rather than another repair.
What it costs in Memphis
Automatic gate installation in Memphis typically runs $2,900 to $7,500 depending on the operator, gate size, and whether we’re running power from the house or adding solar.
How we do it
We set the posts with concrete, hang the gate, mount the operator from your chosen brand, run and protect the power or solar feed, and tune travel limits and force settings so the gate opens and closes without strain.
Driveway Gate Installation
Signs you need it
Your home has a driveway opening without a gate, or the existing gate is rusted, sagging, or no longer matches what your HOA requires.
What it costs in Memphis
Driveway gate installation in Memphis typically runs $1,800 to $5,500 for a single residential swing or slide gate, before automation, depending on width, material, and hardware.
How we do it
We measure the opening, confirm setbacks and any HOA finish rules, order the gate to fit, set the posts, hang the gate, and install hinges or track hardware rated for the salt environment.
What Gate Installation Costs in Memphis
| Item | Typical range in Memphis |
|---|---|
| Manual single swing gate | $800 – $2,400 |
| Automatic gate (operator included) | $2,900 – $7,500 |
| Driveway gate without automation | $1,800 – $5,500 |
Prices in Memphis run slightly higher than inland because we specify aluminum or marine-grade hardware and set posts deeper for river wind. Every quote is agreed before we start, so the number we give you is the number on the invoice.
Can you install a gate in Memphis without tearing up the driveway?
In most cases, yes. We set posts in isolated footings that disturb only a small section at each side of the opening, not the full driveway surface. On paver or stamped concrete driveways in Memphis we plan the footing cuts to minimize visible repair work.
Do Memphis HOAs require approval before a gate goes in?
Many of the master-planned communities in the 34221 area do require architectural review for gate style, color, and height. We’re not the HOA, but we can build to the spec your board approves, and we’ll tell you before ordering anything if the rules look strict. Call (844) 791-3898 and we’ll walk through your community’s requirements first.
Brands We Service in Memphis
We service equipment from nine major gate operator brands, and the ones we see most often on Memphis driveways are LiftMaster, DoorKing, Elite, and Mighty Mule. Our techs stock common boards, remotes, and safety parts locally, and brand-agnostic diagnosis means we find the real failure instead of pushing a full replacement. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Memphis, FL
| Service | Typical range in Memphis |
|---|---|
| Hinge replacement | $180 – $400 per hinge |
| Gate sag adjustment | $165 – $315 per gate |
| Latch or lock replacement | $140 – $280 |
| Track repair or replacement | $380 – $900 |
| Operator replacement (motor only) | $450 – $1,500 |
| Control board replacement | $300 – $900 |
| Automatic gate installation | $2,900 – $7,500 |
| Driveway gate installation | $1,800 – $5,500 |
What pushes a Memphis price up is usually rust: a hinge that has seized and needs to be cut off, a track that has corroded through, or a post that has rotted at the base from river humidity. We quote every job up front and the price is fixed before any work begins, so there isn’t a surprise at the end.
Neighborhoods We Serve in Memphis
We cover the full 34221 ZIP and the communities along the Manatee River and east toward the newer developments. Response time for most Memphis calls is same day or next morning, depending on the season and the part needed.
- Riverside and riverfront communities along the Manatee
- Master-planned subdivisions east of I-75
- Older small-lot streets near the river
- Pool-enclosure and courtyard gate homes in newer phases
Service Area – Cities Near Memphis
Beyond Memphis, we work regularly in neighboring Manatee County communities, including Palmetto, FL just west along the river, Ellenton, FL to the north, and South Bradenton, FL and West Bradenton, FL for larger residential and light-commercial systems. Same team, same gate-only focus.
Serving Memphis, FL — Our Local Coverage Area
We’re based in the Memphis area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Memphis
For a gate that won’t close or a stuck operator, we can often get a Memphis tech out same day. It depends on the season and the part required, but we schedule around securing your property first. Call (844) 791-3898 and give us the symptom; we’ll tell you honestly when we can be there.
We build and repair to the spec your HOA requires, and we’re familiar with the style and material rules in several Memphis communities. The approval itself sits between you and your board, but we can provide the details they’ll ask for, and we won’t order a gate until the spec is clear.
Yes. The Manatee River channel carries Gulf air inland, and steel hardware that would last years in Lakeland rusts noticeably faster here. That’s why we recommend aluminum gates and marine-grade hinges on most Memphis jobs, which changes the long-term cost of ownership for the better.
If your gate is stuck, sagging, or simply done, call Courtyard Gate Repair at (844) 791-3898 for a free estimate. Back to working, and staying that way.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Memphis Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Brian Lawson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Rachel Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Diego Rodriguez