Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Marco Island
Gate repair in Marco Island usually costs between $185 and $475 for most hinge, alignment, and opener board fixes, with same-day service available for urgent failures. We’re the local Gate Repair team that property managers and HOA boards call when a swing gate stops swinging or a slide gate refuses to budge. Courtyard Gate Repair knows Marco Island’s specific combination of salt air, afternoon lightning, and high-end gated enclaves better than any mainland contractor. If your gate is stuck open right now, call (844) 791-3898 and Noel Braddock or one of our technicians will talk you through what’s likely wrong before we even roll a truck.
Why Courtyard Gate Repair Is Marco Island’s Preferred Gate Repair Company
Marco Island homeowners and property managers keep our number saved because we show up knowing their equipment. Not guessing at it. When you need DoorKing service in Marco Island for a slide gate at a Verona Walk community that stops closing, or a Mighty Mule swing arm on a canal-front estate in 34145 goes dead after a storm, we arrive with the right diagnostic tools and parts inventory already thought through. Gates are the only trade we work in. That focus means our technicians can identify a failed limit switch, blown control board, or corroded hinge post faster than a general contractor who splits his week between fences, garage doors, and screen enclosures.
Noel Braddock built this company around a simple promise: repair what’s repairable, replace only what’s truly dead. That’s why Gate Repair in Marco Island callers often tell us we saved them from an unnecessary full operator replacement. Our reputation in the area comes from years of honest diagnosis on LiftMaster, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Mighty Mule systems. We’re gate specialists, not generalists, and when you call (844) 791-3898, the person who answers actually knows what your gate does.
Styles & brands we work with
Wrought Iron Gate Repair in Marco Island
Wrought iron gate repair in Marco Island is one of our most common calls, and the salt-laden air is almost always part of the story. That beautiful black gate at the foot of your driveway takes a beating from Gulf moisture and UV exposure. Hinges corrode, lower rails rust from the inside out, and gate panels slowly drop until they scrape the paver driveway. We repair the root cause, not just the symptom: hinge post restoration, rust treatment, weld repair on cracked scrollwork, and panel realignment so the gate hangs true again.
Hinge and Post Reconstruction
On Marco Island, we regularly find hinge posts rusted at the base where irrigation water and salt air concentrate. Rather than patching a wobbly post, we cut out the corroded section, sleeve and weld new steel, and reset the gate to swing clean. A typical wrought iron hinge and post rebuild in this market runs $285 to $520 depending on post condition and gate weight.
Rust Scale and Weld Repair
Older wrought iron gates from the 1990s and early 2000s often have rust scaling hidden behind decorative scrollwork near the bottom rail. We grind back to solid metal, weld in new stock where needed, and apply a corrosion-inhibiting primer before finish paint. Most weld-and-rust repair jobs on Marco Island run $220 to $410 per gate panel.
Metal Gate Repair in Marco Island
Metal gate repair in Marco Island covers aluminum, steel, and mixed-metal driveway and pedestrian gates, and the island’s humid season brings a predictable wave of failures we’ve learned to expect. Aluminum gates and frames oxidize at connection points, steel rack and pinion tracks bind with corrosion, and gate rollers seize. The good news: most of these problems are repairable without replacing the entire gate. We carry replacement rollers, rack sections, hinge hardware, and receiver brackets sized for the most common Marco Island installations.
Rack and Pinion and Roller Service
Slide gates along the wider waterfront lots in 34146 use rack and pinion drive systems that salt air attacks relentlessly. We replace worn rack sections, free seized roller assemblies, and adjust chain or belt tension to spec. Budget $240 to $480 for typical slide gate roller and rack service on Marco Island, depending on gate length and hardware condition.
Gate Realignment and Latching
When a metal gate sags enough to miss the latch post, forcing the opener to work harder, you’re shortening the life of the motor and the board. We correct gate sag at the hinge rather than the panel, realign the latch receiver, and rebalance the gate so the operator isn’t fighting dead weight. Realignment work on Marco Island typically runs $185 to $360.
Trusted Brands We Service in Marco Island
Whether it’s a LiftMaster arm on a Hideaway Beach estate or an Elite slide operator at a Verona Walk entrance, we know your system. Courtyard Gate Repair technicians carry diagnostic experience and replacement parts for DoorKing, LiftMaster, and Mighty Mule systems most common on Marco Island, plus FAAC, BFT, Linear, Viking, Ghost Controls, and Elite for the broader mix we see across Collier County. We keep frequently needed boards, safety photocells, and limit switches in local stock so a repair van leaving for Marco Island doesn’t have to double back to Fort Myers for parts. Your brand. Our expertise.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Marco Island Homes
- Dead 1990s control boards after lightning: Marco Island’s summer thunderstorms send surges through gate operators that reset or destroy original control boards. Homes built with 1990s LiftMaster and Elite systems still running their original electronics are our most frequent board-replacement calls.
- Sagging gates that drag on pavers: Salt air corrodes hinge pins and post hardware, so heavy wrought-iron and aluminum gates drop at the latch end. The gate scrapes the driveway, the opener strains, and eventually something gives.
- Phantom stops from water-blown sensors: Humid months and daily downpours let moisture into safety photocells and loop detectors. The gate stops halfway, reverses for no reason, or refuses to close without holding the button.
- Worn posts leaning out of plumb: Older Marco Island homes from the 1970s and 1980s often have driveway gate posts set in soil that shifts with the island’s wet-dry cycle. The post leans, the gate binds, and the whole system works harder than it should.
Pricing for Gate Repair in Marco Island, FL
What you’ll pay depends on what’s actually wrong, and we quote every job before we start. No surprises. Here’s honest pricing for Marco Island’s market:
- Gate realignment, hinge adjustment, and latch correction: $185 – $360
- Wrought iron weld and rust repair (per panel): $220 – $410
- Hinge and post reconstruction: $285 – $520
- Slide gate roller and rack service: $240 – $480
- Control board replacement (parts and labor, brand-dependent): $310 – $680
- Safety photocell or loop detector replacement: $195 – $340
The price is agreed before any work begins. Always. Call (844) 791-3898 for a free estimate over the phone, and we’ll give you a realistic range for your specific gate and operator.
We Also Serve Cities Near Marco Island
Our service area reaches beyond Marco Island to neighboring communities including Marco, Lely Resort, Verona Walk, and Lely. If you’re managing a gate in one of those areas and need a specialist familiar with Collier County conditions, call (844) 791-3898. We’re the Marco Island gate team that treats every repair as a diagnosis, not a guess.
Serving Marco Island, FL — Our Local Coverage Area
We’re based in the Marco Island area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Marco Island
Most 1990s-era gate operators on Marco Island can be retrofitted with a new control board rather than a full operator replacement, especially if the motor and gearbox still run quietly. The failure is typically the board or the transformer, not the mechanical drive. A board replacement runs $310 to $680 installed depending on brand, while a new operator runs $1,200 to $2,800. If your operator is a LiftMaster, Elite, or Mighty Mule from that era, call (844) 791-3898 and we’ll tell you honestly which route makes financial sense before you spend a dollar.
If your gate was installed before the mid-2000s or the operator is original to a 1990s home, it likely lacks the monitored safety photocells and force-reversal settings that UL 325 requires today. A gate that can’t detect an obstruction and reverse is a genuine safety hazard, especially around children or delivery vehicles. We inspect actuator force settings, photocell function, and edge sensors as part of every repair call on Marco Island, and we’ll tell you exactly what needs upgrading to meet current code.
The sag almost always starts at the hinge post, not in the gate panel itself. On Marco Island, salt air corrodes hinge hardware and the post base weakens over time, letting the gate drop at the latch end. We rebuild the post, replace worn hinges, and realign the gate so the opener isn’t fighting the extra weight. In Hideaway Beach we were called to a waterfront estate where the original 1990s LiftMaster swing gate operator had a water-blown control board after a thunderstorm surge, and the wrought-iron panel had dropped enough to drag on the driveway. We replaced the board, corrected the sag at the hinge post rather than the panel, and verified the safety photocell was working before we left. Call (844) 791-3898 for a realignment quote.
Humidity and water intrusion are the culprits. Marco Island’s summer moisture gets into keypad housings, loop detector seals, and photocell enclosures, causing phantom opens, stuck codes, and gates that won’t hold closed. This is a repairable problem, not a reason to replace the whole system. We trace the water entry point, replace corroded connectors, and reseal the housing to island-grade standards. That fix typically runs $195 to $340 per component.
Yes, we work directly with HOA boards and property managers throughout Marco Island’s gated communities, including Hideaway Beach, Verona Walk, and other enclaves in 34145 and 34146. We know the approval workflows, the aesthetic standards these communities enforce on gate hardware, and the access coordination required for contractor entry. We’ll provide written quotes, photos for board review, and scheduling that works around your community’s rules. Call (844) 791-3898 and we’ll include your HOA paperwork in the quote from the start.
When your gate is down, every hour it stays broken is an hour your property isn’t secured the way you designed it. Courtyard Gate Repair serves all of Marco Island with same-day emergency response for stuck gates, dead openers, and safety failures. Call (844) 791-3898 now and Noel Braddock or one of our gate specialists will get you back to working. Free estimates, upfront pricing, and the kind of honest diagnosis that comes from working on gates and nothing else.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Marco Island and Collier County with gate-specific repair since day one.