Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Three Oaks
Electric gate repair in Three Oaks typically runs $180 – $340 for a service call and most common fixes, with same-day and emergency dispatch available across the 33967 ZIP. Whether your gate stopped mid-cycle on a Monday morning or a thunderstorm fried your control board Saturday night, we show up with the parts and the diagnostic equipment to get it moving again. We know Three Oaks well – the gated enclaves off Three Oaks Parkway, the carriage homes near San Carlos Park, the villa communities where HOA rules dictate what your gate can look like. Call (844) 791-3898 for a free estimate, and we’ll get a technician to your driveway fast.
Why Courtyard Gate Repair Is Three Oaks’s Preferred Electric Gate Repair Company
We’re gate specialists, not generalists. Every technician who rolls into Three Oaks works on gates full time – electric operators, swing arms, slide tracks, keypads, photo-eye sensors, and the occasional stubborn hinge. That focus matters here because Three Oaks homes are different from the rest of Lee County. The Mediterranean-revival villas and carriage homes were built in the 1990s and 2000s, and most of them started with manual driveway gates that someone later automated. That means we’re often undoing shortcut work from a previous install, not just swapping a motor.
Noel Braddock leads our team, and he’s the one you’ll talk to when a diagnosis gets complicated. The crew has trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so when we tell you your operator’s control board is shot, it’s because we’ve seen that exact failure on that exact brand before. We repair what others replace. Three Oaks homeowners call us because the gate works again after one visit, and the fix lasts.
Styles & brands we work with





Gate Opener Repair in Three Oaks
Gate opener repair in Three Oaks is the core of our work here, and a typical job runs $220 – $400 depending on whether we’re replacing a stripped gear, a failed capacitor, or an entire operator arm. Most opener issues we see in Three Oaks come from two things: builder-grade units installed when a manual gate got automated years ago, and southwest Florida’s salt-laden air eating at electrical connections and terminals. We diagnose the exact failure – motor, limit switch, board, or gear – before we touch anything.
Operator Arm and Motor Service
When a swing gate arm stops mid-travel or grinds instead of gliding, the motor or gear assembly is usually the culprit. We replace gear sets, arm assemblies, and motors in the field for most brands we stock. If the operator is beyond saving, we’ll tell you straight and quote a replacement that fits your existing post and HOA-approved style.
Limit Switch and Travel Adjustment
If your gate closes too far, doesn’t open all the way, or reverses at the wrong point, the limit switches or travel settings are out of adjustment. We recalibrate travel and force settings on LiftMaster, DoorKing, and Mighty Mule systems to match your gate’s weight and travel distance. This is a fast fix that usually runs under $200, and it prevents the gate from slamming or stalling.
Automatic Gate Repair in Three Oaks
Automatic gate repair in Three Oaks covers everything from a dead keypad to a full system that won’t respond, and most jobs run $250 – $450. The systems in Three Oaks are a mix of retrofitted swing operators, slide gates on newer builds, and community entry gates with loop detectors. We fix the whole system, not just the operator – because a gate that won’t open is often a sensor, a board, or a power problem, not a motor problem.
Control Board and Surge Damage
Southwest Florida thunderstorms are hard on gate electronics. A single lightning strike near your community can fry a control board, a receiver, or a keypad. We carry replacement boards for most major brands and install surge protectors on our repairs so the next storm doesn’t take the new board with it.
Safety Sensor and Loop Detector Repair
If your gate won’t close, closes on a car, or opens and closes on its own, the photo-eye sensors or the underground loop detector are usually involved. We test, clean, and calibrate sensors, and we replace loop detectors that have corroded from Three Oaks’s humid, salty air. Proper entrapment protection is a safety issue, not an optional add-on – we bring every repair up to UL 325 standard.
Trusted Brands We Service in Three Oaks
Three Oaks has a mix of gate equipment – some DoorKing and Elite operators on community entry gates, a lot of Mighty Mule and LiftMaster units on private villas, and the occasional FAAC or BFT on higher-end homes. We’re brand-agnostic, which means we diagnose the actual fault and fix it – we don’t push a replacement just because we’d rather sell you a different brand. We keep common parts for these systems on our trucks, and anything we don’t have, we source same-week. Your brand. Our expertise.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Three Oaks Homes
- Retrofitted operators on manual gate frames. Many Three Oaks villas started with a manual driveway gate, then got a builder-grade operator bolted on years later. The hinge posts were never sized for motorized use, so the post settles, the gate binds, and the operator’s gears strip. We fix the post footing first, then the operator.
- Surge-damaged control boards after summer storms. Three Oaks sits right in the path of frequent afternoon lightning. A board that worked fine in the morning can be dead by dinner. We install surge protection on every board we replace.
- Corroded photo-eye sensors and loop detectors. Salt air and humidity eat at exposed sensor housings and the wire connections underground. A sensor that’s corroded can make your gate refuse to close – or worse, close on a car.
- Keypad and remote failures from UV and weather exposure. The keypads on Three Oaks gates take full sun and rain. We see failed buttons, cracked housings, and unresponsive receivers on systems that are otherwise fine.
Pricing for Electric Gate Repair in Three Oaks, FL
Expect a service call in Three Oaks to run $75 – $125 just to get a technician to your driveway and diagnose the issue. Most common repairs fall in this range:
- Limit switch adjustment or replacement: $150 – $220
- Photo-eye sensor repair or replacement: $180 – $260
- Control board replacement: $260 – $420
- Keypad or remote replacement: $120 – $220
- Full operator replacement: $650 – $1,400 depending on brand and gate weight
If you’re automating a manual gate, budget an additional $400 – $900 for conduit, post footing reinforcement, and wiring – things that were rarely done right when the gate was first installed. Every price is quoted and agreed before we start work. No invoice surprises. Call (844) 791-3898 for a free estimate.
We Also Serve Cities Near Three Oaks
While this page focuses on Three Oaks, our technicians regularly work in San Carlos Park, Estero, Fort Myers, and Harlem Heights – all within a short drive. If your community or property sits near the border, call us and we’ll confirm coverage. This page is part of our broader Electric Gate Repair coverage across Lee County.
Serving Three Oaks, FL — Our Local Coverage Area
We’re based in the Three Oaks area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Three Oaks
Budget $400 – $900 beyond the operator for conduit, wiring, post footing reinforcement, and safety sensors. Most Three Oaks gates built in the 1990s and 2000s were installed manual, which means the hinge post was never sized for a motor and there’s no power run to the gate. Skipping the post work leads to exactly the kind of binding and gear-stripping we repair constantly. Call (844) 791-3898 and Noel can walk you through what your specific gate needs.
Southwest Florida’s summer thunderstorms produce frequent lightning strikes and power surges, and most gate control boards and keypads in Three Oaks lack surge protection. A nearby strike can send a spike through your electrical panel straight into the operator’s board, frying it instantly. We install inline surge suppressors on every repair to prevent a second failure next storm season.
Yes. Three Oaks is a deed-restricted community, and most enclaves have architectural review boards that dictate gate color, material, and style. When we replace a gate or an operator, we match the existing community standard – whether that’s a black aluminum swing gate with specific finial details or a particular operator arm finish. We’ve worked with multiple HOAs in the 33967 ZIP and know what the architectural committees expect.
Your gate should reverse immediately if it hits resistance while closing, and it should have working photo-eye sensors mounted at the entrapment zones. If your gate doesn’t reverse on contact, or if the photo-eyes are cracked, clouded, or misaligned, call us. Entrapment protection isn’t optional – it’s a UL 325 safety requirement, and on a property with kids or pets, a malfunctioning sensor is genuinely dangerous.
The most common cause of a sagging gate in Three Oaks is an undersized hinge post that was never meant to carry a motorized gate. The original manual gate install used a standard post footing, and after the operator was added, the extra weight and repeated movement caused the post to lean. The fix is resetting the post in a deeper footing with more concrete, then re-hanging and re-balancing the gate. Call (844) 791-3898 for a free assessment – we’ll tell you if your sag is a hinge problem or a footing problem before we quote anything.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Three Oaks and greater Fort Myers.