Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Pelican Bay, FL | Courtyard Gate Repair
We provide independent Ghost Controls gate repair across Pelican Bay, from the main entry gates off Tamiami Trail to village amenity gates and pool access points. What makes our Ghost Controls work different here is simple: we know these salt-air failures before we even open the control box, and we photograph and document existing mounts for association approval before any hardware swap. Call (844) 791-3898 for a free estimate. Noel Braddock and our team handle Ghost Controls solar and AC operators daily in Pelican Bay’s condo and villa communities.
Why Pelican Bay Residents Choose Us for Ghost Controls Service
Ghost Controls isn’t a side line for us. Our technicians work on these solar and AC operators every week across Pelican Bay’s condo and villa communities, and we stock the OEM control boards, arms, and battery harnesses that fail in this salt-air climate. We’re an independent repair shop, not affiliated with or authorized by Ghost Controls, and that independence matters. It means we diagnose the actual failure, not a sales quota. Noel Braddock grew up in Fort Myers near the Edison and Ford Winter Estates, and he started Courtyard Gate Repair because he got tired of watching homeowners get handed vague estimates for problems that had a clear, fixable cause. A gate doesn’t fail all at once – it tells you what’s coming if you know what to look for. In Pelican Bay, what’s coming is usually corrosion, storm surge, or an association that needs documentation before anything gets touched. We handle all three.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Pelican Bay
- Salt fog corrosion on control box terminals and battery leads. Solar-efficient Ghost Controls units in Pelican Bay sit close to the Gulf, and salt-laden air works into the control box year-round. We see intermittent low battery faults and random open/close cycles that trace back to corroded terminals, not dead batteries. We clean, reseal, and replace harnesses with marine-grade options where the OEM finish has given up.
- UV-cracked arm housings and keypad faceplates on exposed gates. Pelican Bay’s intense sun beats on pool and village-access gates that face west and southwest. The plastic housing around the operator arm cracks, moisture gets into the limit switch, and the gate stalls mid-travel. We replace the housing, inspect the switch, and seal the new part against the next wet season.
- Post-storm power dips frying AC control boards. Heavy-Duty Dual Swing operators run on AC power, and Pelican Bay’s summer thunderstorms spike the transformer and take out the board. Remotes lose their codes. The gate goes dead. We replace the board with OEM parts, reprogram the remotes, and reseal the box.
- Sagging posts and corroded hinge pivots tripping the obstruction sensor. Association-spec gates in Pelican Bay are built to match, but the hardware behind them ages in salt air. When a hinge binds or a post shifts, the operator arm fights the load and the sensor shuts it down. We straighten or rebuild the pivot, then recalibrate the operator.
- Low battery faults on solar gates in shaded courtyard positions. Pelican Bay’s condo towers and villa layouts create shaded pockets where a solar panel doesn’t get full sun. We reposition panels, test the charge circuit, and replace battery harnesses that have been cooking in the Florida heat.
Ghost Controls Service in Pelican Bay: What Local Conditions Mean for Your Equipment
Pelican Bay’s gates are overwhelmingly community-association controlled. The Pelican Bay Foundation and the dozens of village HOAs specify uniform designs and materials for everything from the main entry gates to the village amenity gates, so gate repair here is as much about matching association standards and scheduling around association approval as it is about the hardware. Because the Pelican Bay Foundation and village HOAs mandate uniform gate designs, any operator or hardware swap on a community entry or amenity gate must match the association’s approved finish and profile before install. We photograph and document existing Ghost Controls mounts for board submission rather than swapping to a different-brand housing. That’s a real step most repair companies offering Ghost Controls in Naples or Fort Myers won’t think about until the HOA rejects the work. We document before we touch, then fix it right. For Ghost Controls owners in Pelican Bay, summer afternoon thunderstorm outages and post-storm power dips regularly knock out operators and scramble access codes. The predictable surge callout after every storm is a big part of the repair calendar. We keep OEM boards and battery harnesses on hand for exactly that reason.
Ghost Controls Models & Products We Service in Pelican Bay
We service the full Ghost Controls lineup that appears in Pelican Bay’s communities. The Heavy-Duty Dual Swing AC operator is common on main entry gates. The Solar-Efficient Single Swing (TSS1) shows up on villa and courtyard gates. Tube Gate Openers handle sliding gates at storage areas and service entrances. The Architectural Series appears where the association specified a higher-end housing. For critical electronics, we use Ghost Controls OEM control boards, arms, and battery harnesses. Where OEM finishes degrade in salt air, we substitute marine-grade stainless or sealed aftermarket hardware. We repair operators when the board, motor, and arm are serviceable. We recommend replacement only when the housing and gearbox are corroded beyond safe operation. Our focus is electric gate repair, motor repair, and battery backup work. Learn more about our Ghost Controls sales & service.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Pelican Bay
Ghost Controls repair pricing in Pelican Bay depends on what failed and where the gate sits. Control board replacement on a Heavy-Duty Dual Swing typically runs $280 to $520 including the OEM board and reprogramming. Battery harness replacement on a solar unit runs $90 to $180. Arm housing and limit switch work runs $140 to $260. Full motor replacement runs $350 to $650. Hinge pivot rebuilding on a sagging association gate runs $200 to $400 depending on post condition. Every job gets a written price quoted and agreed before any work starts. No surprises on the invoice. We offer free estimates across Pelican Bay. Call (844) 791-3898 to schedule one.
Serving Pelican Bay, FL — Our Local Coverage Area
We’re based in the Pelican Bay area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Pelican Bay
Post-storm power dips spike the AC transformer on Heavy-Duty Dual Swing operators and fry the control board, which resets learned remotes and codes. We replace the board with an OEM part, reseal the control box against salt fog, and reprogram the remotes. Call (844) 791-3898 for a storm-damage inspection.
Yes. We photograph and document existing Ghost Controls mounts before any swap so the replacement matches the association’s approved finish and profile. We submit documentation for board approval and schedule around the HOA’s timeline.
In Pelican Bay’s salt air, the control box terminals and battery leads corrode first, interrupting the charge path even when the panel gets plenty of sun. We clean the terminals, test the charge circuit, and replace corroded harnesses with sealed alternatives. Call (844) 791-3898 for a diagnostic visit.
We do. Pelican Bay’s high-rise and mid-rise condo towers plus attached villa communities mean most Ghost Controls work is on pool, village-access, and exterior entry gates, not private residential drive gates. We handle all of it.
We prioritize gate-down calls at condo towers because a stuck gate blocks residents and emergency access. After a July thunderstorm rolled through, a village HOA in Pelican Bay called us about a Ghost Controls Heavy-Duty Dual Swing entry gate that was dead and had lost its remote codes. We found a blown control board from the post-storm surge, replaced it with an OEM board, resealed the box against salt fog, and reprogrammed the association’s remotes the same morning. Call (844) 791-3898 for emergency scheduling.
Service Areas Near Pelican Bay
We serve Pelican Bay and surrounding communities throughout the Pelican Bay service area. Our Ghost Controls work extends into Ghost Controls service in Charlotte Harbor and Ghost Controls service in Harbour Heights. We also cover Fort Myers, North Fort Myers, Tice, Pine Manor, Lochmoor Waterway Estates, and Whiskey Creek.
Book Your Ghost Controls Service in Pelican Bay Today
If your Ghost Controls gate is down, acting up, or losing codes after a storm, call (844) 791-3898. We’ll diagnose the failure, quote the fix before any work starts, and get your gate back to working and staying that way.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Pelican Bay and Southwest Florida with independent Ghost Controls service.