Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Repair in Tice, FL | Courtyard Gate Repair
We repair DoorKing slide and swing gate operators across Tice, FL, and we do it as an independent service provider, not a factory-authorized dealer. If your DoorKing 6050 won’t close after a storm, or a 1601 swing unit has stopped mid-travel, we can usually diagnose it the same visit. What makes our DoorKing work different in Tice specifically is that we already know how unincorporated Lee County lots, sandy drive aprons, and rainy-season corrosion punish these operators. Call (844) 791-3898 for an honest assessment from a gate technician who knows the brand.
Courtyard Gate Repair handles DoorKing sales & service for residential and light-commercial gate systems throughout the 33916 ZIP code. We’re not tied to a single manufacturer’s sales agenda, so the recommendation you get is based on what your operator actually needs, not what we’re incentivized to sell.
Why Tice Residents Choose Us for DoorKing Service
DoorKing operators are workhorses in east Fort Myers. We see them on older chain-link driveways, small agricultural parcels, and the light-commercial compounds strung along Palm Beach Boulevard. The 6050, 1601, and 1812 units have been in service here for decades, and they fail in ways that are specific to this climate. Humidity corrodes terminal blocks. Afternoon thunderstorms flood low-mounted sensors. UV cooks wiring insulation until it cracks. If you’ve had a DoorKing gate for more than a few years in Tice, you’ve probably already met at least one of these problems — that’s why we offer Gate Repair in Tice.
Noel Braddock, our owner, grew up in Fort Myers and spent years working on gates across Lee County before starting Courtyard Gate Repair. He’s the one who teaches our team the tell-tale signs of a board that’s about to go versus one that has years left. That’s why homeowners and property managers in Tice call us instead of rolling the dice with a general handyman. Gate specialists, not generalists.
Styles & brands we work with
Common DoorKing Gate Repair Problems We Solve in Tice
- Slide gates that stop mid-travel or reverse without a command. On older DoorKing 6050 slide operators, we routinely find failed limit switches or a control board that has absorbed years of humid air and heat. After enough afternoon downpour cycles, the board traces corrode and the unit loses its position memory. The gate then behaves erratically, opening partway or reversing for no reason.
- Photo-eye sensors that won’t let the gate close after rain. Tice driveways often sit on sandy fill without curbs, which means the low-mounted sensors get splashed with silt and standing water during the summer rainy season. On an unpaved or gravel apron the problem is worse. The gate reads a blocked beam and refuses to close, even though nothing is in the way.
- Dead operators after a short power blip. Corroded battery-backup terminals and plug-in transformer connections are common on DoorKing slide and swing units in Tice. UV and humidity eat through the terminal blocks, so the gate works on a normal day but goes completely dead the moment the power flickers.
- Seized rollers, worn hinge plates, and rusted track overloading the motor. Most DoorKing gates in Tice are paired with older chain-link or tubular-steel driveway gates, not decorative ornamental systems. When those rollers seize up, the operator’s overload sensing trips and the gate stops moving. The motor isn’t bad; the hardware dragging it down is.
- Older swing operators that won’t open all the way. DoorKing 1601 and 1602 swing operators accumulate corrosion on hinge plates and mechanical stops. On properties near standing water or heavy vegetation, we often find the gate is physically binding, not failing electrically.
DoorKing Service in Tice: What Local Conditions Mean for Your Equipment
Tice is unincorporated Lee County, not Fort Myers city limits. That single fact shapes nearly every DoorKing repair we do here. Gate electrical and permit work runs through county rules, not municipal ones, and many lots are on sandy fill without curbs, paved aprons, or full sidewalks. When we install or remount a DoorKing operator in Tice, we plan for soft-sand footings and standing rain water, not city-standard concrete pads — experience we’ve also brought to Fort Myers Shores DoorKing service. Sensor mounting has to sit above the splash line. Conduit runs need to survive soil that shifts with every wet/dry cycle. We’ve worked on enough properties along Palm Beach Boulevard and the side streets feeding off it to know exactly what fails when unincorporated-lot conditions meet southwest Florida weather.
On a Palm Beach Boulevard corridor property, our crew was called out to a small commercial compound whose DoorKing 6050 slide operator had quit after a storm. The low photo-eye was silt-covered and the limit assembly had drifted, so the gate would open but never re-close. We cleared and remounted the sensors above the splash line, reset the limits, replaced the corroded terminal-block connections and the backup battery, and the gate cycled reliably through the next afternoon downpour. That’s the Tice job in miniature: age, sand, and rain working together against a good operator.
DoorKing Models & Products We Service in Tice
We work on the DoorKing 6050 family of slide operators, the 1601 and 1602 swing operators, the 6400 swing family, and the 1812 slide unit. For boards, limits, and safety accessories, we use genuine DoorKing OEM parts where the unit’s age and model call for it. For wear items like rollers, hinges, and hardware, we’re comfortable with quality aftermarket equivalents when OEM adds no real benefit. We keep common DoorKing boards and limit assemblies stocked locally so Tice calls don’t wait on a parts shipment from across the country, and we carry the same inventory for DoorKing service in North Fort Myers.
See the difference
Before
After
Before
After
Before
AfterDoorKing Service Pricing in Tice
Most DoorKing repairs in Tice run between $180 and $340 for the service call and common fixes, but the rough ranges below give you a more useful picture. A control board replacement on a 6050 slide operator typically runs $450 to $850 including the part. Photo-eye sensor replacement or remounting sits between $150 and $300. Battery backup replacement runs $150 to $400 depending on the unit. Limit switch replacement is usually $180 to $320.
- Service call and diagnosis: $90 – $150
- Photo-eye repair or replacement: $150 – $300
- Limit switch replacement: $180 – $320
- Control board replacement: $450 – $850
- Battery backup replacement: $150 – $400
Every price is quoted and agreed before any work starts. No invoice surprises at the end. Call (844) 791-3898 for an exact quote on your DoorKing equipment in Tice. Estimates are free.
Serving Tice, FL — Our Local Coverage Area
We’re based in the Tice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DoorKing Gate Repair in Tice
Usually not. The most common cause on Tice properties is a photo-eye sensor that has been knocked out of alignment or covered in silt and splash from an unpaved driveway apron. The operator thinks something is in the path and refuses to close. We remount the sensors above the splash line, clean or replace them, and test the close cycle. In most cases the motor and board are fine.
Yes. Tice sits in unincorporated Lee County, so gate electrical and structural work follows county rules. We handle the county-specific requirements on every Tice job, including footings and conduit runs planned for sandy fill rather than city-standard concrete pads. Call (844) 791-3898 for the specifics on your property.
We service them regularly. The 1601 is a reliable unit, and most failures come down to corroded limit assemblies, worn hinge plates, or a failing capacitor, all of which are replaceable. We give a straight repair-versus-replace call only when the corrosion has spread through the board and motor together. We repair what others replace.
Yes. Most DoorKing operators in Tice are mounted on older chain-link or tubular-steel gates, not ornamental systems. We handle the full mechanical side: seized rollers, rusted track, worn hinge plates, and gate realignment, so the operator isn’t fighting the hardware. That combination of electrical and mechanical work under one roof is what we do.
It will if the battery and terminal connections are in good shape. A heavily corroded battery-backup terminal block will fail right when you need it. We test the battery under load, replace it when it’s marginal, and check that the charging circuit is working. For a Tice property that loses power during afternoon storms, a healthy backup is the difference between a working gate and a call for help. Call (844) 791-3898 to schedule a battery and board check.
Service Areas Near Tice
We serve the full Tice ZIP code and the surrounding east Fort Myers corridor. If your DoorKing gate is in Tice service area, North Fort Myers, Fort Myers, or Whiskey Creek, we can reach you promptly. We also handle DoorKing calls in DoorKing service in Pine Manor and DoorKing service in Lochmoor Waterway Estates.
Book Your DoorKing Service in Tice Today
A gate doesn’t fail all at once – it tells you what’s coming if you know what to look for. If your DoorKing operator in Tice is acting up, call (844) 791-3898 for a free estimate and a straight diagnosis. Same-day service is available for urgent slide and swing operator failures across the 33916 ZIP code.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Tice and greater Lee County.