Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bonita Springs, FL
Gate installation in Bonita Springs usually means working around salt air, storm exposure, and gated communities that expect the work to blend in as much as function. We install automatic swing and slide gates, driveway gates, and light-commercial systems across the 34133, 34134, 34135, and 34136 ZIP codes, and the consistent theme is this: hardware that gets picked for looks still has to survive a subtropical coastline. Courtyard Gate Repair has served Bonita Springs since 2017. If you’re weighing a new gate or replacing one that no longer holds up, call (844) 791-3898 for a free estimate.
Why Bonita Springs Homes Are Different
Most of our Bonita Springs work happens in neighborhoods where the gate is the first thing you see and the first line of access. Waterfront estates along the Imperial River and Gulf-access communities run ornamental iron driveway gates that look impressive and corrode fast in salt-laden air. Older manufactured-home neighborhoods and ranch-style streets use lighter aluminum or vinyl gates. The range keeps us honest: a heavy iron estate gate on a swing operator is not the same job as a light aluminum privacy gate on a residential opener, and repair quality depends on knowing which one you’re standing in front of.
The climate writes its own schedule. Summer humidity accelerates surface rust on iron. Hurricane season brings wind loads that knock swing gates out of alignment and push debris into sensor paths. Salt air works at hinges, boards, and battery terminals year-round. We plan every install and repair with those conditions in mind, using sealed connections where possible, proper drainage, and post footings deep enough to hold the gate square when the ground saturates.
Styles & brands we work with
Our Main Bonita Springs Services
Two call types dominate for Bonita Springs homeowners. The first is a gate that won’t open, won’t close, or won’t stay aligned. The second is an automated system where the operator, sensors, or wiring have gone down. Both are covered below.
Gate Repair in Bonita Springs
Most gate repair calls in Bonita Springs come down to two root causes: rust and storms. Salt air gets into hinges, axles, and lock housings on ornamental iron gates and slowly binds them. Storm winds throw gates out of alignment, bend brackets, and knock sensors out of position. We inspect, identify the actual failure, and repair rather than replace unless replacement is the honest call. Gate Repair in Bonita Springs covers everything from hinge replacement to full sliding-gate realignment.
Electric Gate Repair in Bonita Springs
When an automatic gate stops responding, the problem is usually in the operator, the sensor loop, or the wiring between them. Bonita Springs adds one variable most inland areas don’t deal with: humidity and salt working through the control board enclosure. We diagnose by brand and component, not guesswork. If your LiftMaster or Ghost Controls board is fried, we say so. If a sensor loop is out of true, we fix that instead of selling you an operator. Electric Gate Repair in Bonita Springs addresses the full electrical chain.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Bonita Springs
A new gate in Bonita Springs is not just a gate; it’s the first thing a visitor sees and the barrier that protects the property when the power fails. Whether the job is an automatic driveway gate for a Gulf-access estate, a sliding gate for a commercial lot, or a lighter privacy gate for a ranch home, we build for salt air, summer storms, and access that needs to work after a hurricane knocks the grid out. Gate Installation starts with a free measure and a written scope, not a sales pitch.
Automatic Gate Installation
Signs you need it
You’re manually pushing a heavy gate open each day, or adding a keypad/intercom and want the gate itself to respond without a person holding it.
What it costs in Bonita Springs
Most automatic gate installations in Bonita Springs run $4,000 to $8,500 depending on gate size, operator brand, and whether new conduit is needed.
How we do it
We measure the opening and gate weight, mount the operator, set the swing arc or slide track, wire the control board and safety edges, then test under load with power and battery backup.
Driveway Gate Installation
Signs you need it
You need secure vehicle access off Imperial River Drive or a similar thoroughfare, and your existing access point has no barrier that closes behind you.
What it costs in Bonita Springs
Driveway gate installation in Bonita Springs typically runs $3,500 to $7,000 depending on gate span, material, and whether an operator and access pad are included.
How we do it
We set posts in concrete at the driveway mouth, hang the gate, square it to the drive, install the latch or operator, and set sensor positions so the gate never closes on a vehicle.
Sliding Gate Installation
Signs you need it
Your driveway is steep, short, or has an approach that can’t fit a full swing arc, so a slide gate makes sense for vehicle access.
What it costs in Bonita Springs
Sliding gate installation in Bonita Springs runs $4,500 to $8,000, with cost shifting on gate length, track material, and whether an operator is added.
How we do it
We pour a level track footing, set the gate and roller carriages, adjust the cantilever or floor track, mount the operator if needed, and align the safety edges and limits.
What Gate Installation Costs in Bonita Springs
| Item | Typical range in Bonita Springs |
|---|---|
| Basic manual gate install (aluminum/vinyl, no automation) | $2,000 – $4,000 |
| Automatic swing gate install (operator included) | $4,000 – $8,500 |
| Sliding gate install (track and operator) | $4,500 – $8,000 |
Prices rise when we’re working with heavy ornamental iron on posts that need deep concrete footings, or when the existing pillar work needs reinforcement. Every quote is agreed before any work starts.
How long does a gate installation take in Bonita Springs?
Most residential gate installations finish in one to two days after site prep. Sliding gate tracks and automatic systems take a little longer because of the concrete work and wiring runs. Call (844) 791-3898 for a schedule once your quote is accepted.
Do you handle the power run and safety edges on a new automatic gate?
Yes. We run the low-voltage power, install the operator, connect safety edges and sensors, and test everything with the gate opening and closing under load. Call (844) 791-3898 for an exact scope on your property.
Brands We Service in Bonita Springs
We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems regularly, along with other major operator brands. The difference that matters for Bonita Springs is parts: we know which boards, sensors, and arms are stocked regionally and which ones turn into two-week backorders, so repairs don’t stall. Our brands page shows the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bonita Springs, FL
| Service | Typical range in Bonita Springs |
|---|---|
| Manual gate repair (hinge, latch, alignment) | $200 – $500 |
| Sliding gate realignment | $300 – $700 |
| Electric gate board replacement | $350 – $900 |
| Operator replacement (residential) | $1,200 – $3,000 |
| Safety sensor replacement | $180 – $400 |
| Battery backup install or replacement | $350 – $800 |
| Full gate replacement (manual, standard residential) | $1,500 – $4,000 |
| Automatic gate installation | $4,000 – $8,500 |
| Sliding gate installation | $4,500 – $8,000 |
| Aluminum privacy gate install | $2,000 – $4,000 |
Salt-air corrosion and post-storm realignment push repair costs toward the upper edge in Bonita Springs; light maintenance catches issues earlier and costs less. Your price is set before work starts, not discovered after.
Neighborhoods We Serve in Bonita Springs
We cover the full Bonita Springs area, from the Gulf-access communities off Bonita Beach Road to homes along Imperial River and the older ranch and manufactured-home streets further inland. The terrain changes quickly here, so we schedule by neighborhood, not just by ZIP code.
- Bonita Shores
- Imperial Harbor
- River Reach
- Spring Creek Estates
- Winding Cypress
Most Bonita Springs locations can be reached for a service call on the same day it’s scheduled.
Service Area – Cities Near Bonita Springs
Our technicians also cover the nearby communities that ring Bonita Springs. If you’re in Estero, FL, Island Walk, FL, Naples Park, FL, or Pelican Bay, FL, you’re still in our service area, and the same brand-agnostic diagnosis applies.
Serving Bonita Springs, FL — Our Local Coverage Area
We’re based in the Bonita Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bonita Springs
Yes. Post-storm call waves are common here, and we prioritize properties where a gate is stuck open or blocking vehicle access. Debris, wind, and power outage damage to sensors and alignment are the usual culprits. Call (844) 791-3898 and we’ll tell you when we can be there.
Most Bonita Springs gated communities require an architectural review or board sign-off before a new gate or operator change. We can provide the specs and material details your HOA asks for and install only after approval clears. Ask our team if you’re unsure what your community requires.
We cover 34133, 34134, 34135, and 34136. If you’re on the edge of town in a new development or an older manufactured-home park, you’re still inside the service area. Call (844) 791-3898 for a schedule.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bonita Springs Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Paul Schaefer"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Danielle Quinn"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Brian Lawson