Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Burnt Store Marina, FL
Gate installation in Burnt Store Marina runs $2,850 to $9,700 for most single and double driveway systems, with marina-side and HOA entrance work often quoted higher because access control, safety loops, and corrosion-rated hardware are built into the job. Most properties here are 1980s-through-2000s homes and condos inside a master-planned marina and golf community, which means almost every gate we touch serves a shared entrance, a boat-storage yard, or a community dock rather than one private driveway. Salt-laden air off Charlotte Harbor, hurricane-season lightning, and daily traffic from boat trailers and golf carts wear out operators, boards, and keypads faster than inland installs. Courtyard Gate Repair has served Burnt Store Marina since 2017 with a gate-only crew that carries parts for DoorKing, Elite, Mighty Mule, and LiftMaster on the truck, so diagnosis and repair usually happen in a single visit. Call (844) 791-3898 and we’ll give you a straight answer on what’s failed and what it costs before any work starts.
Why Burnt Store Marina Homes Are Different
Burnt Store Marina is not a typical Southwest Florida subdivision. It’s a master-planned marina and golf community where nearly all gates serve shared community entrances, docks, and boat-storage areas rather than individual driveways. Gate repair here is as much a multi-unit access-control and HOA coordination job as it is a residential service call. When a marina-side gate goes down, it isn’t one homeowner waiting in the car; it’s every resident, every delivery, and every golf cart trying to reach the harbor. That changes how we stock parts, how we schedule, and how we document the work for HOA boards.
The climate pushes harder here than it does ten miles inland. Subtropical heat and humidity corrode keypad contacts and terminal strips. Summer thunderstorms send surges through control boards that were never surge-protected from the builder. Hurricane season drives salt spray and wind-driven rain into operator housings and photo-eye sensors. The housing stock, mostly single-family homes and condos built from the 1980s through the early 2000s, sits along planned subdivisions and the marina itself, and many properties carry private boat docks plus community-operated security gates, pool gates, and storage-yard gates. A gate that was installed in 1995 with a then-current Linear board is often still swinging today, but its safety edges are sunbaked, its hinges are salt-corroded, and its underground loop wires have been nicked by years of landscape work. We see that combination constantly along the 33993 corridor.
Styles & brands we work with
Our Main Burnt Store Marina Services
Two services dominate the calls we get from Burnt Store Marina homeowners and property managers: mechanical gate repair and electric gate repair. Here’s what each one looks like in this community.
Gate Repair in Burnt Store Marina
Mechanical gate repair in Burnt Store Marina usually starts with a gate that’s grinding, sagging, binding on its track, or refusing to latch. Marina-side gates take relentless abuse from boat trailers, golf carts, and salt air, so corroded hinge pins, bent cantilever rollers, and separated welds show up far more often here than standard driveway fatigue. Our techs carry replacement rollers, hinges, latch hardware, and track stock sized for the gate types common in this community. We repair what others replace, which matters when an HOA has a 25-year-old steel gate that still has decades of life left in it. See Gate Repair in Burnt Store Marina for the full mechanical breakdown.
Electric Gate Repair in Burnt Store Marina
Electric gate repair in Burnt Store Marina is the higher-volume call because nearly every entrance here is automated. Lightning-fried control boards, salt-corroded keypads, misaligned photo-eyes, and dead safety loops are the routine failures. The storms that roll off the Gulf each summer don’t need to strike the gate directly; a surge on the community’s power feed is enough to take out a Viking or FAAC board that’s been soaking in humid air for a decade. Courtyard Gate Repair troubleshoots the actual failure before recommending parts, so a dead keypad becomes a $180 swap instead of a $4,000 operator replacement scare. Read Electric Gate Repair in Burnt Store Marina for wiring, boards, and automation details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Burnt Store Marina
Gate installation in Burnt Store Marina means building for salt air, hurricane wind loads, and daily golf-cart traffic from day one, not retrofitting around them later. Homes here were mostly built from the 1980s through the 2000s, so an installation often means replacing a gate and operator that outlived their design life and now need corrosion-rated hardware, surge-protected controls, and a stronger post foundation than the original pour. We install both manual and automated systems, and whether it’s a LiftMaster arm or a DoorKing commercial slide, every install gets quoted in writing before the first hole is drilled. That’s the same standard we use on every Gate Installation job we take.
Automatic Gate Installation
Signs you need it
You’re replacing a manual gate you now have to open by hand multiple times a day, or an existing operator has failed and the gate is no longer safe or practical to run manually.
What it costs in Burnt Store Marina
Automatic operator installation in Burnt Store Marina typically runs $2,850 to $7,400 for a single driveway or community pedestrian gate, depending on gate weight, cycle frequency, and whether pad or steel-post mounting is required.
How we do it
We measure gate weight and width, set the operator brand (DoorKing, Elite, Mighty Mule, or LiftMaster) to match the duty cycle, mount the operator on a concrete pad or post, wire the controls with surge protection, and set opening and closing force plus safety edges before testing the full cycle count.
Electric Gate Installation
Signs you need it
The gate is new or existing but lacks power, a keypad, an intercom, or vehicle-detection loops, and the opening needs to work automatically without someone getting out of a car or golf cart.
What it costs in Burnt Store Marina
Full electric gate installations, including the operator, keypad, safety edges, and control board, generally run $3,950 to $9,700 in Burnt Store Marina depending on single versus double leaf and trenching distance.
How we do it
We run conduit from the nearest power source, install the operator and control board, mount the keypad in a corrosion-resistant housing, set photo-eyes and safety loops, program remotes and keypad codes, and demonstrate the full stop-and-reverse function before leaving.
Driveway Gate Installation
Signs you need it
A private driveway gate is sagging, wracked by years of humidity and storm cycles, or the old single-swing gate no longer clears today’s wider vehicles and trailers.
What it costs in Burnt Store Marina
Driveway gate installation in Burnt Store Marina, including a new frame, hinges, posts, and sometimes a basic operator, typically lands between $3,100 and $8,400 depending on width, material, and whether a power loop is required for exit.
How we do it
We set new posts below the coral-rock frost line with concrete that’s allowed to cure, hang a steel or aluminum gate sized for the actual opening, align hinges so the leaf doesn’t fight its own weight, and integrate any operator, keypad, or safety sensor the owner wants on day one.
Sliding Gate Installation
Signs you need it
The lot can’t accommodate a swing gate’s arc, the driveway slopes toward the street, or a heavy commercial-grade leaf would stress hinged posts beyond what the soil and concrete will hold.
What it costs in Burnt Store Marina
Sliding gate installation in Burnt Store Marina, with track or cantilever rollers, steel framing, and an operator, falls between $4,200 and $9,700, with cantilever systems running higher than ground-track systems because of the extra foundation work.
How we do it
We pour a concrete track or set cantilever rollers, build the gate frame with proper counterweighting, install the operator with rack-and-pinion drive, and adjust rollers and guides so the gate slides without binding through hundreds of daily cycles.
What Gate Installation Costs in Burnt Store Marina
| Item | Typical range in Burnt Store Marina |
|---|---|
| Automatic gate operator installation | $2,850 – $7,400 |
| Full electric gate installation (operator, keypad, safety edges, board) | $3,950 – $9,700 |
| Driveway gate installation (frame, hinges, posts, basic operator) | $3,100 – $8,400 |
Salt exposure, distance to the nearest power source, and HOA-mandated finishes are the three biggest price movers on installation work in Burnt Store Marina. Every quote is written and agreed before work begins, so the number you approve is the number you pay.
Does a new gate installation in Burnt Store Marina require HOA approval?
In most cases yes. Burnt Store Marina’s community entrances, dock gates, and storage yards are managed by HOAs or the master association, and gate style, color, height, and automation features usually need written approval before installation starts. We provide spec sheets and site plans to help move that process along, but the approval itself comes from your association board. Call (844) 791-3898 if you need documentation for a pending project.
Can you match an existing Burnt Store Marina gate style for a replacement install?
Yes. We take field measurements and photos of the existing gate, then match the material, panel profile, finish, and hardware placement as closely as the current code allows. Many 1980s and 1990s gates in Burnt Store Marina use profiles that are still manufactured, which keeps a replacement from standing out against neighboring homes. Call (844) 791-3898 for a site measure.
Brands We Service in Burnt Store Marina
DoorKing, Elite, Mighty Mule, and LiftMaster are the operators we see most often on Burnt Store Marina gates, from private driveway swings to shared dock and storage-yard sliders. We stock the common boards, limit switches, remotes, and photo-eyes for these lines locally, which is why we can usually diagnose and repair in one trip instead of shipping parts from a warehouse two states away. See our brands for the full list of equipment we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Burnt Store Marina, FL
| Service | Typical range in Burnt Store Marina |
|---|---|
| Hinge and weld repair on a swing or sliding gate | $285 – $850 |
| Keypad or intercom replacement | $180 – $520 |
| Photo-eye sensor repair or realignment | $150 – $350 |
| Control board replacement | $425 – $1,600 |
| Loop detector or safety loop repair | $500 – $1,450 |
| Gate operator motor replacement | $650 – $2,700 |
| Full-service visit (diagnosis and minor adjustment) | $130 – $310 |
| Battery backup system installation | $450 – $1,900 |
| Automatic gate operator installation | $2,850 – $7,400 |
| Full electric gate installation | $3,950 – $9,700 |
| Driveway gate installation | $3,100 – $8,400 |
| Sliding gate installation | $4,200 – $9,700 |
Two conditions push prices toward the upper end of these ranges in Burnt Store Marina: salt-corrosion damage that requires stripping and refinishing hardware instead of a straight part swap, and the multi-party access setups common on marina-side and HOA gates where loop detectors, keypads, and remote programming have to work for dozens of users at once. Every repair price is quoted and agreed before any work starts, so there’s no surprise invoice at the end.
Neighborhoods We Serve in Burnt Store Marina
We work the full 33993 footprint, from the marina-facing condos and docks to the golf-course subdivisions and the storage yards behind the community’s commercial edge.
- Marina-side condos and boat dock access gates
- Golf-course residential subdivisions
- Private single-family homes along the canal and harbor frontage
- Community storage and boat-yard gates
- HOA entrance and pool gates throughout the master community
Response across Burnt Store Marina is typically same-day or next-day for repair calls, since our Fort Myers shop is stocked and the drive in covers the distance without a dispatch delay. Installation jobs are scheduled after a free site measure.
Service Area – Cities Near Burnt Store Marina
Courtyard Gate Repair works throughout Lee County and the nearby islands, so if you’re just outside the Burnt Store Marina gates, we’re still likely your crew. We regularly take calls from Cape Coral, FL, Palmona Park, FL, Bokeelia, FL, and Pine Island Center, FL. Same team, same gate-only focus, same upfront pricing.
Serving Burnt Store Marina, FL — Our Local Coverage Area
We’re based in the Burnt Store Marina area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Burnt Store Marina
Yes, regularly. A large share of the gates in Burnt Store Marina are community-operated, so we’re used to HOA documentation, board approvals, and billing that goes through a property management company. We’ll provide written diagnostics, itemized repair quotes, and photo documentation if your board requires it. Call (844) 791-3898 to set up a site visit for a shared gate.
For mechanical and electric repair calls, we usually arrive the same day or the next morning. A gate that’s stuck open on a boat-storage yard or a dock entrance is a security and convenience problem for every resident, so we prioritize emergency calls on shared gates and get them closed and functioning before doing cosmetic or secondary work. Call (844) 791-3898 and we’ll give you a straight ETA.
It does. Salt off Charlotte Harbor accelerates corrosion on hinge pins, keypad contacts, operator housings, and terminal strips, and we see it in almost every marina-side gate we open. That’s why we use sealed connectors, corrosion-rated hardware, and surge protection on Burnt Store Marina installs rather than the inland-spec parts that fail here within a couple years. Call (844) 791-3898 for an assessment of your gate’s existing hardware.
If your gate is grinding, dead, or overdue for replacement in Burnt Store Marina, call Courtyard Gate Repair at (844) 791-3898. We’ll diagnose the real problem, quote the fix in writing, and get your gate back to working, and staying that way.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burnt Store Marina Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Grace Kim"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Rafael Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Paul Schaefer