Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tice
A broken or sagging gate in Tice needs a specialist who knows this community’s older lots, sandy soil, and county permitting rules. We’re Courtyard Gate Repair, and our Gate Repair team handles every part of the job: diagnosis, hardware replacement, post resetting, and operator work. If your driveway swing gate won’t close, your commercial slide gate is reversing on its own, or a hinge post has pulled loose in the sandy fill, call us at (844) 791-3898. We know Tice’s housing stock and its failure patterns, and we quote every job before any work starts.
Key Takeaways
- Gate repair in Tice typically runs $150 – $600 for common mechanical fixes, with full operator replacement higher.
- Most Tice gates sit on unpaved drive aprons with sandy footings, which changes how posts should be anchored.
- Lee County permits apply to Tice gate work, not Fort Myers city permits.
- We repair all nine major operator brands and never push a replacement if the existing equipment can be saved.
Why Courtyard Gate Repair Is Tice’s Preferred Gate Repair Company
We are gate specialists, not generalists. Every technician at Courtyard Gate Repair works exclusively on gates: swing gates, slide gates, barrier arms, courtyard gates, and the automated operators behind them. That focus means we diagnose faster and carry the right parts. Homeowners and property managers in Tice call us because we show up knowing the difference between a LiftMaster arm problem and a FAAC board failure, and we don’t burn billable hours figuring it out in front of the customer.
Our lead, Noel Braddock, has built the company around brand-agnostic repair. Whether your Tice property runs a DoorKing commercial operator, a Mighty Mule residential arm, or an Elite slide motor, we service it. We repair what others replace. And in Tice specifically, that matters because so many gates here are older, owner-installed, or adapted units that a single-brand dealer would refuse to touch. Call (844) 791-3898 and tell us what your gate is doing. We’ll give you a straight answer.
Styles & brands we work with
Wrought Iron Gate Repair in Tice
Wrought iron gate repair in Tice usually means fixing a gate that’s been on the property since the house was built, often 30 to 50 years ago. The ironwork itself may be solid, but the hinge posts have shifted in the sandy soil, the hinges are worn oval, or the bottom rail has started to rust through at the welds. We cut out the rusted section, weld in a replacement rail, straighten the frame, and set the hinges back to factory alignment. A typical wrought iron gate repair in Tice runs $200 – $500, depending on how much fabrication and post work is involved.
Post Reset and Hinge Replacement
Nearly every wrought iron gate we see in Tice has the same problem: the gate post was set directly into sandy fill without a deep enough concrete pour. After years of swing cycles and rainwater, the post leans and the gate drags. We reset the post in proper concrete, re-square the gate to the opening, and replace the hinges if they’re wallowed out. On Tice lots without curbs, we also check the drive apron for erosion under the gate’s arc.
Weld Repair and Rust Treatment
Subtropical humidity and afternoon storms do real damage to iron gates here. We grind out rust pockets, weld cracked joints, and treat the bare metal before painting. If the gate needs full sandblasting and powder coating, we’ll say so and give you that price separately. But most Tice gates need targeted repair, not full restoration. That’s what we quote and what we do.
Metal Gate Repair in Tice
Metal gate repair in Tice covers the workhorse gates this community actually has: chain-link driveway gates, tubular-steel yard gates, welded steel slide gates on commercial lots, and the occasional flat-bar perimeter gate. These gates take brutal sun exposure and seasonal standing water, so we see rust at the welds, bent top rails from kids or tree limbs, and rollers worn flat from running on unpaved, gritty drive aprons. A typical metal gate repair in Tice runs $150 – $450. Slide gate hardware, rack replacement, and post footing resets push the job into the $500 – $800 range when the gate is heavy or the footing has failed.
Chain-Link and Tubular-Steel Repairs
The classic Tice chain-link driveway gate is a galvanized pipe frame with fabric stretched across it. The fabric and frame are cheap. The post footing is the expensive part to fix correctly. When the gate sags, the cause is almost always the hinge post leaning in soft soil. A panel-only fix will fail again within months. We pull the post, pour a deeper concrete footing with proper drainage, and re-hang the gate so it swings clean.
Slide Gate Track and Rack Repairs
Along the Palm Beach Boulevard corridor, small commercial lots run welded-steel slide gates on metal tracks or rack-and-pinion drives. Rain grit gets packed into the rack, the rollers chew themselves up, and the gate starts bucking or stalling. We clean and re-square the rack, replace worn rollers and guide wheels, and raise low-mounted components clear of standing water. This is where our commercial experience with DoorKing and LiftMaster operators pays off.
Trusted Brands We Service in Tice
Your brand. Our expertise. We’re trained on nine major gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. So whether your Tice home runs an older Mighty Mule on a chain-link gate or your commercial property uses a DoorKing slide operator, we know the board, the limits, the sensor wiring, and the failure points. We keep common control boards, safety photocells, remote receivers, and limit switches stocked for quick turnaround. No waiting a week for a single-brand dealer to order a part.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Tice Homes
- Post lean and gate sag: Sandy fill under Tice drive aprons lets gate posts lean over time. The gate drags, the latch stops aligning, and panel-only fixes fail again. We set posts in proper concrete with drainage, which is the only fix that lasts.
- Phantom reversals after rain: Low-mounted safety photocells catch standing water during the summer rainy season, telling the operator something is in the gate’s path. Or the operator enclosure itself isn’t sealed. We raise sensors, seal enclosures, and test the full safety circuit.
- HOA and gated-community entry failures: Shared entry gates cycle hundreds of times a day. Limit switches wear out, keypad readers go dead, and resident access remotes drop off the system. We work with management companies to restore function without redesigning the entry.
- Rust at the bottom rail and weld joints: Humidity, rain, and lawn irrigation splash rust out the lower rail of steel and iron gates. Ground contact is the enemy. We cut out compromised sections, weld in new steel, and treat the area before repainting.
Pricing for Gate Repair in Tice, FL
Gate repair in Tice is honest work with honest numbers attached to it. A simple hinge replacement or latch alignment runs $150 – $250. A mid-range job like resetting a leaning post, replacing a safety photocell set, or rebuilding a slide gate rack lands between $300 and $600. Full operator replacement, including new arms, boards, and remotes, starts around $700 and goes up from there for commercial slide systems. We don’t quote a low service fee and then ambush you with a big invoice. You get the full price, in writing, before we begin. Call (844) 791-3898 for a free estimate.
We Also Serve Cities Near Tice
Courtyard Gate Repair’s service area covers all of Tice and the surrounding communities. We run calls daily to Gate Repair in Tice, Lochmoor Waterway Estates, North Fort Myers, Buckingham, and Fort Myers Shores. If your property is anywhere near the Palm Beach Boulevard corridor or east Fort Myers, you’re in our normal service area.
Serving Tice, FL — Our Local Coverage Area
We’re based in the Tice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tice
Your HOA or community management company has to approve any change to gate style, height, finish, or color before work begins. A repair that restores the gate to its existing condition usually doesn’t trigger architectural review, but a visible change does. We coordinate directly with your management company, provide whatever documentation they need, and do the work only after written approval is in place. Call (844) 791-3898 and we’ll help you navigate the review process.
Yes. Tice is unincorporated Lee County, so gate work falls under county permitting rules, not Fort Myers city jurisdiction. Most repairs, like hinge replacement, roller swaps, and operator servicing, don’t require a permit. Structural work, like replacing a post or pouring new footings, may. We know what Lee County expects and we’ll tell you on the estimate whether your specific job needs paperwork.
Water is getting into the safety sensor system. Low-mounted photocells sit in standing water on Tice’s sandy, unpaved drive aprons, and the operator reads that as an obstruction. The fix is raising the photocells above the flood line, sealing the wiring connections, and resetting the travel limits. We see this constantly on Tice commercial lots after summer downpours. Call (844) 791-3898 for a service call before the next storm season.
Usually, yes. The panel is rarely the problem. The hinge post has leaned in the sandy soil, and once we reset the post in a proper concrete footing, the existing panel often hangs straight again. Replacing the whole gate without fixing the footing would just give you a new gate that sags the same way. We’ll quote the post work separately and only replace the panel if the frame or fabric is actually damaged.
Yes. We’re trained on nine major brands: LiftMaster, DoorKing, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. We don’t push you toward a different brand or a full replacement if your existing operator can be repaired. Diagnosis comes first, then an honest recommendation. Call (844) 791-3898 and tell us what brand you have.
Contact Courtyard Gate Repair for Tice service: If your gate won’t open, won’t close, or is making noise it never made before, call (844) 791-3898. We’ll answer, listen, and schedule a service call for your Tice property. Every job gets a written quote before work starts, and we stand behind the repair.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Tice and surrounding Lee County communities.