Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Fort Myers Shores
Gate repair in Fort Myers Shores usually means one of three things: a gate that won’t open, a gate that won’t stay shut, or a gate that grinds and shudders every time it moves. Most jobs run $180 to $450 for hinge, latch, and alignment work, while operator and board failures land between $250 and $700. We serve the whole 33905 area, from Palm Beach Boulevard riverfront lots to the canal streets off Heiman Avenue. Call (844) 791-3898 and we’ll have a specialist at your gate, usually the same day.
The neighborhoods here aren’t like inland Lee County subdivisions. Fort Myers Shores sits tight against the Caloosahatchee River, and that waterfront position shapes every gate failure we see. Salt air eats galvanized hardware. Storm winds torque aluminum frames. Boat trailers clip posts. A company that learned gates in a dry inland development won’t recognize half of what we repair here. We work in Fort Myers Shores weekly, so we do.
Why Courtyard Gate Repair Is Fort Myers Shores’s Preferred Gate Repair Company
Courtyard Gate Repair is a gate-only shop. Every technician, every part on the truck, every call we take is about gates. That focus matters in Fort Myers Shores, where a sagging driveway gate on a riverfront lot is rarely just a hinge problem. It’s usually a rusted post footing, or a salt-corroded operator arm, or a track that storm debris knocked two inches out of square. General contractors chase symptoms. We’ve already seen your failure mode a dozen times before we pull into the driveway.
Residents off Palm Beach Boulevard and the canal roads near Kenny Court call us because we name the actual problem, not a vague “needs work.” When a galvanized post has rusted thin inside its concrete footing, tightening the hinge buys maybe three weeks. We tell you that on the first visit. It’s the difference between a repair that holds and one you pay for twice.
Noel Braddock leads our repair team, and his name sits on every quote we write. The approach is straightforward: diagnose the real failure, price it before any work begins, and leave the gate running like it should have been all along. Homeowners in Fort Myers Shores have trusted Courtyard Gate Repair for everything from Mighty Mule openers to custom ornamental steel gates, and we intend to keep earning that call, not coast on it.
Styles & brands we work with
Wood Gate Repair in Fort Myers Shores
Wood Gate Repair in Fort Myers Shores is its own discipline. The riverfront humidity here, combined with daily sun and frequent soaking rain, forces wood gates through expansion and contraction cycles that inland gates never experience. Frames loosen at the joints. Pickets cup and split. Hardware backs out of the wood. On older ranch homes along the canal streets, we regularly rebuild gates where every joint has gone soft and the hinges are pulling free. A typical wood gate repair here runs $160 to $380 for rehanging, brace replacement, and hardware swaps. Full gate rebuilds, where we replace rotted stiles and install new cross-bracing, land between $350 and $800 depending on size. The price is quoted upfront, agreed before we start, and never changed mid-job.
Warped Frame Realignment and Rebuild
Humidity off the Caloosahatchee swells wood and loosens frame joints. We re-square the frame, replace split rails, and install diagonal bracing that adds stiffness against wind load. The repair holds because the brace does the work, not the glue.
Hinge Pull-Out and Post Repair
When screws keep stripping out of a gate post, the wood itself has reached the end of its service life. We drill, plug, and re-anchor, or replace the affected post section entirely. The resulting mount is solid enough for daily use.
Driveway Gate Repair in Fort Myers Shores
Driveway Gate Repair in Fort Myers Shores covers the full range of what’s out here: chain-link drive gates on quarter-acre ranch lots, aluminum estate gates on newer riverfront customs, and the occasional heavy ornamental steel gate with an operator. Most repairs fall between $200 and $600. That includes replacing hinges, straightening a bent frame, re-setting a post, or tuning an opener so the gate no longer slams or stalls. On the Palm Beach Boulevard corridor, we see a lot of gates knocked out of alignment by trailers and delivery trucks that swing too tight. The fix is rarely the gate itself. It’s the post base and the operator limit settings.
Track and Roller Repair for Slide Gates
Cantilever and rolling gates collect sand, leaf litter, and storm debris in the track. That grime wears rollers and causes binding. We clear the rail, replace worn rollers, and re-level the track so the gate glides instead of grinding.
Operator and Safety Sensor Repair
When a driveway gate won’t open from the keypad but moves fine on manual release, the operator board or limit switch is usually the culprit. We work on LiftMaster, Elite, and DoorKing operators found throughout Fort Myers Shores, matching the correct board revision to your unit. Safety photocells get checked and aligned on every operator call, because a gate that closes on a car or a child is not a working gate.
Trusted Brands We Service in Fort Myers Shores
We’re trained on nine major gate operator brands, including DoorKing, Elite, Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, and Ghost Controls. Your brand is our expertise, whether it’s a commercial DoorKing running at a storage facility off State Road 80 or a Mighty Mule on a residential swing gate near the river. We stock common boards, limit switches, remotes, and safety sensors locally, so most Fort Myers Shores repairs don’t wait on a parts shipment. If we don’t have the board on the truck, we know exactly which revision to order, and we don’t guess.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Fort Myers Shores Homes
- Rusted galvanized posts inside concrete footings: On older canal-front homes, the original galvanized hinge post rusts thin at the concrete line. The gate sags no matter how many times the hinge gets tightened. The fix is a new post footing, which we cut, set, and anchor before remounting the gate.
- Salt-air corrosion on ornamental steel gates: Salt-laden air off the Caloosahatchee seizes hinges and snaps hardware on steel estate gates. We replace corroded hinge pins with stainless components suited to the salt exposure, then re-square the leaf so it doesn’t bind.
- Storm-bent aluminum drive gates: Wind and flying debris during hurricane season twist aluminum gates and bow frames. Many straighten successfully if the bends are in the pickets and rails. We assess compression damage before recommending repair over replacement, and we’ll tell you honestly which is cheaper long-term.
- Boat-trailer and RV strikes on entry gates: Palm Beach Boulevard corridor traffic is tight. Trailers clip gate posts and bend leaf edges. We reset posts, replace bent hinges, and re-align the gate. If the strike keeps happening, we can recommend a slide gate or a recessed post configuration that survives the turn radius.
Pricing for Gate Repair in Fort Myers Shores, FL
Here’s what we charge in the 33905 market, based on the actual work we’ve done across Fort Myers Shores:
- Hinge replacement, 2 hinges: $180 – $260
- Gate realignment and adjustment: $140 – $240
- Operator board or limit switch replacement: $250 – $450
- Safety photocell replacement and alignment: $120 – $200
- Post re-setting (concrete footing replacement): $350 – $700
- Wood gate rebuild with new bracing: $350 – $800
- Weld repair on steel or aluminum gate frame: $120 – $350
The final number depends on gate size, material, and whether we’re repairing or replacing the post foundation. Every quote is written before any work starts. You approve the number, then we turn wrenches. Call (844) 791-3898 for a free estimate at your Fort Myers Shores property.
The Hidden Problem Behind Recurring Gate Sag
Here’s something most Fort Myers Shores homeowners never hear from a generalist: on older canal-front properties, the galvanized hinge posts were set decades ago with minimal concrete and no post cap. Decades of rain, salt air, and standing water have rusted those posts thin inside the footing. The gate sags. You tighten the hinge. It sags again in three weeks. The gate isn’t failing. The post is. Until the footing is replaced, no hinge adjustment will hold. That’s the repair that actually lasts, and it’s the one we write up when we see it.
A Recent Repair Off Palm Beach Boulevard
On a riverfront lot off Palm Beach Boulevard, our crew repaired a storm-bent aluminum swing gate whose original galvanized hinge post had rusted through at the concrete line. We replaced the post footing, corrected the sag, and installed a LiftMaster operator with safety photocells to handle the heavy daily use from boat-trailer traffic. The gate now runs silently and squarely despite the salt air. That job is typical of what Fort Myers Shores throws at a gate specialist, and it’s exactly the kind of work we do without calling in a second company.
We Also Serve Cities Near Fort Myers Shores
Our Gate Repair in Fort Myers Shores team covers the whole 33905 area and nearby communities. We regularly drive to Buckingham, Olga, Gateway, and Tice for the same gate repair, operator, and installation work. If you’re just outside Fort Myers Shores, call (844) 791-3898 and we’ll confirm coverage for your street. Our Gate Repair specialists work across Lee County, and a Fort Myers Shores call rarely waits long for a truck.
Serving Fort Myers Shores, FL — Our Local Coverage Area
We’re based in the Fort Myers Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fort Myers Shores
Because the hinge post, not the hinge, is the problem. On older canal-front homes in Fort Myers Shores, original galvanized posts rust thin inside the concrete footing. The gate sags no matter how often you tighten. The permanent fix is a new post footing, which costs $350 to $700 here. Call (844) 791-3898 and we’ll confirm what’s actually failing at your property.
Salt air corrodes the limit switches, terminal blocks, and board connections inside your operator housing. The failure usually starts as an intermittent fault, then the gate stops responding. We clean or replace the corroded components and seal the housing properly. That repair runs $250 to $450 for most Fort Myers Shores operators.
Most storm-bent aluminum gates in Fort Myers Shores can be straightened if the bends are in the pickets and rails and the welds haven’t cracked. Compression damage changes that answer. We’ve repaired storm-damaged gates for $200 to $600; if a replacement is genuinely cheaper, we’ll quote that instead. Estimates are free at (844) 791-3898.
Yes. Every automatic gate operator in Fort Myers Shores must have working safety edges or photocells that stop and reverse the gate if something blocks it. It’s a life-safety device, not an upsell. We check and align these on every operator repair call, and replacement runs $120 to $200.
We repair and rebuild wood gates on riverfront properties throughout Fort Myers Shores. That means re-squaring frames, replacing rot-compromised stiles, installing diagonal bracing, and upgrading to stainless hardware where salt air accelerates corrosion. Typical repairs run $160 to $380; full rebuilds land between $350 and $800. Call (844) 791-3898 for a precise quote on your gate.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Fort Myers Shores and the surrounding Lee County communities.