Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Clewiston
Gate repair in Clewiston usually means one of two things: a driveway or field gate that won’t open, or an automated operator that’s lost its mind. A manual gate job on a residential tube or swing gate in Clewiston typically runs $150 – $350. An operator or board repair on an automated system usually lands between $250 and $650 depending on the brand and what failed. Most jobs we handle in the 33440 area are diagnosed and repaired the same day, because a stuck gate on a cane-field road or lakefront lot isn’t a nuisance, it’s a locked-out piece of equipment. Call us at (844) 791-3898 and we’ll walk you through what’s likely wrong before we even dispatch.
Why Courtyard Gate Repair Is Clewiston’s Preferred Gate Repair Company
We’re gate specialists, not generalists. That distinction matters on the roads around Clewiston because the gates out here aren’t the tidy subdivision swing gates you see in coastal Florida. They’re wide tube gates on ranch lots south of town, slide gates on canal-side properties off the lake road, and older systems hung decades ago on posts set in sandy muck. Our Gate Repair team works on all of it, and we know what Clewiston’s soil and storm season does to hardware. Led by Noel Braddock, we’re a dedicated gate company that services nine major operator brands, so you’re not stuck waiting on a dealer who only knows one line. We stock common boards, hinges, and safety parts, which means we’re not ordering parts and hoping they show up next week.
Styles & brands we work with
Driveway Gate Repair in Clewiston
Driveway Gate Repair in Clewiston usually starts with a gate that’s dragging, sagging, or refusing to stay on its track. Around the older 1950s-70s homes in the town grid, we see a lot of gates hanging on original posts that have shifted over decades. On the ranch-style and manufactured-home lots further out in 33440, the gates are wider and the posts sit in looser ground. The job typically involves resetting or reinforcing the post, re-hanging the gate, adjusting the hinges, and re-aiming any automation so the operator isn’t fighting a crooked panel. Most driveway gate repairs in Clewiston run $200 – $400 including labor and standard hardware.
Hinge & Post Repair
Clewiston’s sandy muck and limestone base pushes posts out of true after every wet season. We re-set them in deeper concrete with proper drainage so they stop moving. If a hinge has wallowed out or snapped, we weld in a new one and re-balance the gate.
Gate Realignment
A gate that scrapes the ground or won’t latch cleanly is usually out of alignment, not broken. We square the frame, shim the hinges, and adjust the catch. On automated gates, we then re-teach the operator’s limits so it stops binding mid-cycle.
Gate Welding in Clewiston
Gate Welding in Clewiston is how we fix what others throw away. Wide field and ranch gates take abuse from cattle, cane trucks, and hurricane wind, and they crack at the hinge mounts and mid-rail joints. On lakefront properties where salt and moisture work on the metal year-round, rust-through at the bottom rail is common. We cut out the rotted section, weld in fresh steel, and reinforce the corners so the panel is stiff again. Depending on the extent of the damage, weld repair in the Clewiston area runs $150 – $450. If a gate is too far gone or too thin to weld safely, we’ll tell you that and price a replacement honestly.
Weld & Rust Repair
Surface rust turns into structural failure faster around Lake Okeechobee than almost anywhere else in the state. We grind, patch, and reinforce before the panel fails. For gates that sit near canals or the levee, we also recommend a fresh rust-inhibiting primer and paint as part of the repair.
Worn Post Reinforcement
When a steel post has rotted at the base or twisted in the ground, we weld plate steel to rebuild the buried section and re-anchor it. This is a routine job on older lakefront and farm gates, where replacement posts are hours away and digging new holes in limestone is slow work.
Trusted Brands We Service in Clewiston
Your brand. Our expertise. We service Ghost Controls, DoorKing, Elite, and Mighty Mule, along with LiftMaster, FAAC, BFT, Linear, and Viking. That matters in Clewiston because a lot of the operators on rural and lakefront gates are older DoorKing or Elite units still running on boards that most general repair companies won’t touch. We carry common repair parts on the truck and can special-order boards within days, not weeks. Whether it’s a Linear arm that stopped mid-travel or a Mighty Mule solar unit that won’t cycle, we know your system.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Clewiston Homes
- Post heave after the wet season: Sandy muck around the lake and cane fields shifts when the water table rises, and gate posts move with it. A gate that closed fine in May is dragging by October, and resetting the post is the actual fix, not just tightening a hinge.
- Obsolete control boards: Older operators around Clewiston often run boards that predate modern photo-eye and loop-detector inputs. We can usually retrofit a current board; sometimes the honest answer is that the board costs more than a new operator.
- Storm corrosion on lakefront gates: Humidity and wind-driven rain around the Herbert Hoover Dike eat hinges and operator enclosures fast. We see rusted hinge pins and corroded limit switches on gates within a few hundred yards of the lake.
- Wide field gates out of alignment: Gates on rural 33440 lots are long, heavy, and hard on their hardware. A 16-foot tube gate on a solar opener will bind if the panel twists even slightly, and the operator will stall or strip a gear.
Pricing for Gate Repair in Clewiston, FL
Most single-gate repairs in Clewiston run between $150 and $650. A hinge replacement or realignment is the low end. A control board swap, gear replacement, or post reset is the mid-range. Full panel welding repairs on a wide field gate or a complete operator replacement can push toward $800 – $1,200. What moves the number is the gate’s size, whether we’re welding or replacing parts, and whether the post needs to be dug out and re-set. We quote every job before we start. The price you approve is the price you pay. Call (844) 791-3898 for a free estimate, and we’ll give you the real number over the phone in most cases.
One thing we tell every Clewiston customer: a gate that’s gone out of alignment once will usually do it again unless the post is fixed. Bouncing a sagging gate back into place lasts weeks. Re-setting the post lasts years. We’d rather do the job once and not see you again until something else actually breaks.
We Also Serve Cities Near Clewiston
Our Gate Repair in Clewiston service area reaches Harlem and South Bay to the southeast, Belle Glade and Belle Glade Camp across the lake. If you’re on the edge of any of those communities and running an older operator or a field gate that’s giving you trouble, call (844) 791-3898 and we’ll schedule a look.
Serving Clewiston, FL — Our Local Coverage Area
We’re based in the Clewiston area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Clewiston
That depends on two things: the condition of the post and the age of the board. If the post is still solid and the operator is a brand we service, repairing is usually the cheaper call, in the $250 – $500 range. If the post has heaved badly or the control board is obsolete and no retrofit exists, replacement is the better money. We’ll tell you which one applies before any work begins. Call (844) 791-3898 for an honest assessment, not a sales pitch.
Because the ground under Clewiston moves. Post heave in sandy muck and limestone after the rainy season is the single most common reason gates around here go out of alignment. If we just re-hang the gate without fixing the footing, it’ll be crooked again by next fall. We re-set the post deeper with proper drainage and compacted base, then re-align the gate. That’s the repair that lasts.
Yes. Any automated gate in Clewiston should have working photo-eyes or another entrapment protection device, both for safety and because modern operators won’t run correctly without them. Older systems from before photo-eyes were standard can often be retrofitted, though some obsolete boards won’t accept the input. If yours can’t, we’ll tell you and show you your options. Get in touch at (844) 791-3898 and we’ll check what your setup can take.
Yes. Many rural Clewiston gates run on solar, and we work on solar-powered operators from Mighty Mule, Ghost Controls, and other brands. Common failures are dead batteries, shaded panels, and charge controllers that have fried in a storm. We diagnose the whole system and fix the actual fault rather than throwing parts at it.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers most residential and light-commercial systems in the Clewiston area, including the older DoorKing and Elite units common on farm and lakefront property. We repair what others replace, and we stock parts for the brands we see most often out here.
If your gate is stuck, sagging, or making a sound it shouldn’t, call (844) 791-3898. We’ll figure out what’s wrong, give you a free estimate, and fix it right the first time.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Clewiston and the Lake Okeechobee area.