Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Tice
Electric gate repair in Tice usually means one of three things: an operator that’s stopped responding, a gate that’s sagging or dragging, or a safety sensor that keeps reversing the gate for no obvious reason. We fix all three, typically in a single visit. If you live off Palm Beach Boulevard, along Bayshore Road, or on one of the unincorporated side streets in 33916, we know the systems on your property and the conditions that break them. Call (844) 791-3898 for a diagnosis from a gate specialist, not a general contractor guessing at the problem.
Why Courtyard Gate Repair Is Tice’s Preferred Electric Gate Repair Company
We’re gate specialists, not generalists. That distinction matters in Tice, where the housing stock runs older and the gates tend to be chain-link or tubular steel units that were installed decades ago and adapted over time. Our techs train on nine major operator brands including DoorKing, Elite, and Mighty Mule, so we walk onto a Tice property already knowing the board layout, the common failure points, and the part numbers we’ll likely need. Tice customers call us because we diagnose the actual fault rather than defaulting to a full replacement.
Led by Noel Braddock, Courtyard Gate Repair brings the same brand-agnostic depth to residential driveway gates on Tice’s ranch-style lots as we do to light-commercial slide gates along the Palm Beach Boulevard corridor. We repair what others replace. When a FAAC board has a bad relay or a Ghost Controls arm has a stripped gear, we fix the component. We’re also set up for the occasional county-specific wrinkle on Tice jobs: unincorporated Lee County permitting and inspections apply here, not Fort Myers municipal rules. We know which repairs trigger a county review and which don’t, so you won’t get surprised mid-project.
Styles & brands we work with
Gate Access Control in Tice
Gate Access Control in Tice means getting the entry system working again: keypads, card readers, intercoms, safety loops, and the operator brain that ties them together. On Tice properties, this work frequently involves older Doorking or Linear entry systems where the keypad has corroded from humidity, or a loop detector has failed at a commercial driveway on Palm Beach Boulevard. When a keypad stops reading codes or a remote won’t open a gate in 33916, the issue is usually a failed component, not an entire system needing replacement.
A keypad repair in Tice typically runs $150 to $350. Replacing a failed safety loop detector runs $275 to $450 including the saw cut and sealant. Full access control board replacement on a commercial slide gate runs $400 to $900 depending on the brand and board generation.
Keypad and Intercom Repairs
Keypads on Tice gates sit in direct sun and salt air, and the membrane buttons and circuit traces degrade faster than they would inland. We stock replacement keypads for DoorKing and Linear systems common on older Tice driveway gates, and we can typically swap a failed unit in under an hour.
Loop Detector and Safety Sensor Work
Automatic exit loops buried in Tice’s sandy driveways crack and lose continuity, which makes a commercial gate refuse to open on approach. Repair means locating the break, replacing the loop wire, and resealing. Low-mounted photocells are also frequent casualties of afternoon downpours.
Commercial Gate Operator in Tice
Commercial Gate Operator in Tice covers the heavy slide and swing operators on storage facilities, multifamily sites, and the light-industrial parcels along the Palm Beach Boulevard corridor and near the railroad alignment. These are high-cycle systems, usually DoorKing, FAAC, or BFT, and they fail differently than residential units: limit switches drift, gearboxes wear out, and the rack and pinion alignment on slide gates gets knocked out when a post settles in sandy fill.
A commercial operator repair in Tice runs $350 to $800 for common component failures like limit switches, capacitor replacements, and control board repairs. A full commercial slide operator replacement runs $2,200 to $4,500 installed, depending on horsepower and cycle rating. We quote every price before work begins, in writing, so there’s no invoice surprise after the gate is running again.
Slide Gate Alignment and Rack Repair
Tice’s sandy unincorporated lots are hard on slide gate geometry. When a post shifts even a fraction of an inch, the rack teeth bind and the operator strains against the gate. We re-level the post, shim the rack, and reset the limits so the motor isn’t fighting itself every cycle.
High-Cycle Operator Service
Commercial properties on the Boulevard corridor see hundreds of cycles a day, which means components wear on schedule. We perform targeted service, not guesswork: checking the gearbox oil, limit switch continuity, and chain or belt tension before they strand your tenants at the gate.
Trusted Brands We Service in Tice
Every day we repair systems built by DoorKing, Elite, Mighty Mule, Ghost Controls, and the other major operator manufacturers. In Tice, DoorKing and Ghost Controls appear on a lot of the residential driveway and estate gates, while DoorKing and commercial-grade BFT dominate the corridor sites. Your brand is our expertise, not an obstacle. We stock common boards, remote receivers, safety sensors, and limit switches for these brands in our Fort Myers service vehicle inventory, which means most Tice repairs happen in one trip without ordering parts and waiting.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Tice Homes
- Salt-air corrosion on hinges and welds. Tice’s humid, salt-tinged air eats through painted steel hinges and welds on older chain-link and tubular-steel driveway gates within a few seasons. The gate sags at the hinge post, the operator strains, and sometimes the gate drags on the driveway apron.
- Waterlogged safety sensors after summer downpours. Low-mounted photo eyes and loop detectors on Tice properties catch standing water from frequent afternoon storms, short out, and trigger false stops or complete gate refusal. Replacing a photocell is quick; diagnosing the water path is the part that prevents the callback.
- Settled posts in sandy fill. Lots in Tice sit on sandy fill without curbs or deep footings in many cases, so hinge posts drift over time. A sagging gate is often a footing problem first and an operator problem second, which is why we check the post before we condemn the motor.
- Failed operator boards from humidity and heat. Southwest Florida heat inside a metal operator housing cooks capacitors and control boards. A board that lasted 10 years inland may fail in 6 or 7 in Tice, and replacing it beats replacing the whole operator by hundreds of dollars.
Pricing for Electric Gate Repair in Tice, FL
Electric gate repair in Tice runs from about $150 for a remote receiver or keypad fix up to $900 for a commercial-grade control board replacement. A typical residential operator repair on a swing gate lands between $225 and $450. Slide gate rack and post re-leveling runs $275 to $600, and a full residential operator replacement with labor runs $1,100 to $2,400. We give a written quote before any work starts, and you approve the number before we touch the gate. Estimates are free. Call (844) 791-3898 and we’ll walk you through what’s actually wrong and what it costs to correct.
We Also Serve Cities Near Tice
Beyond Tice proper, our team covers Electric Gate Repair in Tice and the surrounding communities: Lochmoor Waterway Estates, North Fort Myers, Buckingham, and Fort Myers Shores. If your property sits just across the county line or a few miles down Palm Beach Boulevard, you’re still in our service area. Read more about our Electric Gate Repair work across the region.
Serving Tice, FL — Our Local Coverage Area
We’re based in the Tice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Tice
Usually it’s the salt air attacking the safety circuit, not the operator itself. Water intrusion in a photocell or a corroded connection in the low-voltage wiring causes the operator to think something is blocking the gate’s path, so it stops mid-travel. On Tice’s coastal lots we check the sensors and wiring before we condemn the motor, because the failure is often a $180 sensor rather than a $900 operator board. Call (844) 791-3898 for a diagnosis that starts with the cheap parts first.
Most component repairs in Tice do not require a permit, but structural work generally does. Replacing an operator, a control board, a keypad, or a safety sensor doesn’t trigger Lee County review under unincorporated county rules. If we’re resetting a post footing or changing the gate structure, that work falls under county permitting and inspection requirements, and we handle the paperwork as part of the job. Tice is not inside Fort Myers city limits, so municipal codes don’t apply.
For a Tice property, galvanised steel hinges outlast painted steel by years, and we specify galvanised or stainless fixings on every coastal repair we do. Painted hinges on older chain-link and tubular-steel gates start failing within a few seasons in the salt air, while galvanised units typically hold up through multiple storm seasons without sag. We still recommend a corrosion-inhibiting coating on galvanised hardware in the worst exposed spots, but the base material matters most.
Yes, and in Tice that’s one of our most common repairs. When the operator cycles but the gate drags or the latch won’t line up, the usual culprit is a worn top hinge or a settle post foot in sandy fill. We do a hinge replacement or a post re-set without replacing the operator, which keeps the cost in the $275 to $600 range rather than a $1,500-plus full operator swap. The operator usually recovers once the geometry is corrected.
The photocell is mounted low to the ground where standing water from Tice’s afternoon storms collects, and the housing seals degrade from heat and UV exposure. Once water invades the lens or the wiring connection, the sensor shorts or reads false obstructions. We replace the sensor with a properly sealed unit and often raise the mounting point a few inches or add a drip loop to the wiring, which keeps the same failure from returning every rainy season. Call (844) 791-3898 and we’ll sort it before the next round of storms.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Tice and the surrounding Lee County communities.