Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fort Myers Shores
Electric gate repair in Fort Myers Shores usually costs between $185 and $520 for a service call plus parts, depending on whether we’re replacing a limit switch, a control board, or the operator motor itself. We work all over the 33905 ZIP code, from the canal-front streets off Palm Beach Boulevard to the newer riverfront builds on the north bank. Most repairs in Fort Myers Shores get diagnosed and fixed in a single visit. Call (844) 791-3898 and tell us what your gate is doing, or not doing, and we’ll get you scheduled.
Fort Myers Shores isn’t a typical subdivision market. The lots are bigger. The drives are longer. And the salt air off the Caloosahatchee works on gate hardware year-round, not just during hurricane season. We know this because we’ve cut out enough rusted posts and opened enough corroded control boxes in this community to know exactly what fails and why. This page walks through what we see most often here, what repairs cost, and what actually fixes a gate for good in this part of Lee County.
Why Courtyard Gate Repair Is Fort Myers Shores’s Preferred Electric Gate Repair Company
We’re gate specialists, not generalists. Every service van, every shelf in the parts room, every hour of training our technicians have logged exists for one trade: gates. When a Fort Myers Shores homeowner calls us about an opener that hums but won’t move, we’re not trying to remember what a gate operator looks like while we also think about their garage door. We already know. That focus matters more in this area than most, because the failure pattern here rarely starts with the operator itself.
Fort Myers Shores customers call Courtyard Gate Repair for three reasons that keep showing up in conversations. One, we repair what others replace. We’ll put a new control board in a DoorKing or FAAC operator before we talk anyone into ripping out a perfectly good motor for a full-system sale. Two, we know the riverfront and canal-front properties. We know that a gate tripping a breaker after heavy rain is usually a waterlogged splice or a board that got wet inside the housing, not a dead motor. Three, our fixes are built around the actual conditions here: salt-laden humidity, storm debris, and quarter-acre to half-acre lots with long runs of aluminum and ornamental steel. Noel Braddock and the team have been turning down work outside the gate trade for years, just so we can stay sharp on this one discipline.
When you call us from Fort Myers Shores, you’re not getting routed through a national call center to a dispatcher three states away. You get our local team, and you get a technician who has worked on a Ghost Controls swing arm on a canal street and a Linear slide operator on a farm gate off Bayshore Road in the same week. That’s the level of local familiarity you want standing in your driveway.
Styles & brands we work with





Gate Opener Repair in Fort Myers Shores
Gate opener repair in Fort Myers Shores starts with a diagnostic visit, and that visit typically runs $85 to $125 depending on where you are in the 33905 ZIP code. The opener is the part most people blame first, and sometimes they’re right. But here, more than almost anywhere else we work, the opener is often straining against a structural problem: a rusted hinge post, a sagging gate leaf, or a bent track. Our Electric Gate Repair team replaces motors, arms, limit switches, and control boards, but we always check the mechanics of the gate itself before we bolt on new electronics.
On a riverfront lot, a LiftMaster arm can fail because the gate leaf has dropped a quarter inch and the operator is now dragging 400 pounds of metal instead of swinging it. Replace the arm without fixing the sag and you’re back on the phone in six months. We measure, we correct, we replace. Then we test the full open-close cycle with the photocell in place.
Motor and Arm Replacement
When the operator motor has burned out or the arm is binding, we swap in a replacement matched to the existing system, not whatever’s on the truck. Fort Myers Shores has a lot of mixed-brand installs, a FAAC board here, a DoorKing arm there, and we stock parts for all of them. A typical motor replacement on a residential swing gate here runs $250 to $480 in parts, plus the diagnostic and labor.
Limit Switch and Control Board Work
The limit switch is a small component that tells the operator when the gate has opened far enough or closed all the way. When it fails, the gate slams, stutters, or stops mid-travel. We see this a lot after storms when rain gets into the operator housing. Control board replacement depends on the brand: a Ghost Controls board is cheaper than a Viking commercial board, and we’ll walk you through that range before we order anything.
Automatic Gate Repair in Fort Myers Shores
Automatic gate repair in Fort Myers Shores covers the whole powered system: the operator, the safety sensors, the keypad, the remote receiver, and the wiring that ties everything together. A complete service call where we diagnose and replace one failed component usually lands between $210 and $390, though board-level repairs on high-cycle commercial systems run higher. We start every automatic gate repair with a full cycle test, then we open the operator housing and check for corrosion, moisture, and heat damage.
The humidity off the river is relentless. Control boards in this area get hazed with salt and oxidation that inland boards never see. We clean contacts, replace corroded terminals, and when a board is too far gone, we quote you an exact price before any work starts. That price is agreed before we pick up a tool. No surprises on the invoice.
Sensor and Safety Edge Alignment
Photocells and safety edges have one job: keep the gate from crushing your car, your kid’s bike, or your neighbor. When an automatic gate stops reversing on contact, the safety edge or the photocell circuit has failed. That’s a genuine safety problem, not a cosmetic one. We test every safety component on a repair visit and replace what’s failed. On a canal-front property where traffic includes walkers and boat trailers, skipping this test is not an option.
Keypad, Remote, and Receiver Repair
When the remote works from ten feet but not from the street, the receiver antenna is usually the culprit, or the keypad face has water intrusion. We replace keypads, reprogram remotes, and check the receiver frequency against interference from nearby docks and marinas. Fort Myers Shores has enough boat-lift remotes and marina radios in the air that frequency conflicts are more common here than in inland tracts.
Trusted Brands We Service in Fort Myers Shores
We service equipment from nine major gate operator brands, but the ones we see most often in Fort Myers Shores are Ghost Controls on residential swing gates, DoorKing on slide gates and light-commercial entries, Elite on older estate systems, and Mighty Mule on acreage and farm-style setups. We carry control boards, limit switches, remotes, and receiver modules for these and other brands in our local parts stock, which means we’re not ordering parts from a warehouse three states away while your gate sits open. Whether it’s a LiftMaster arm or a FAAC board, we know your system.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Fort Myers Shores Homes
Here’s what actually breaks on gates along the Caloosahatchee, and why:
- Post rot below the concrete line. Original galvanized hinge posts on 1960s and 1970s canal-front homes rust thin inside the footing. The gate sags, the operator strains, and the electronics fail. The fix starts with the post, not the operator.
- Storm-bent tracks and twisted frames. Slide gates on long driveways get hit with branches, debris, and wind shear during hurricane season. The rack binds, the motor overloads, and the gate stops halfway. We straighten or replace the track and realign the rack.
- Control board corrosion from salt air. The board inside the operator housing gets a film of salt and moisture over time. Intermittent failures, gates that open but won’t close, remotes that work sometimes. Board replacement or cleaning fixes this.
- Solar panel undersizing on acreage gates. A solar gate opener with a panel that worked in winter struggles through summer’s cloud cover and storm systems. The battery drains, and the gate sticks open or closed. We size the panel and battery bank to your actual daily cycles.
Pricing for Electric Gate Repair in Fort Myers Shores, FL
Most residential electric gate repairs in Fort Myers Shores fall between $185 and $520 all in. A simple keypad or remote replacement sits at the low end. A hinge-post replacement with concrete work and sag correction sits at the high end, sometimes more if we’re cutting out an old footing and setting new steel. A typical automatic gate opener motor replacement runs $250 to $480 in parts plus labor. Control board swaps range from $140 for a basic Ghost Controls board to $600 or more for a commercial DoorKing or BFT board. We quote every repair with the full price before work begins, and that number is what you pay. Estimates are free. Call (844) 791-3898 for a specific number on your gate.
We Also Serve Cities Near Fort Myers Shores
Our service runs through all of Fort Myers Shores and the surrounding Lee County communities. We work regular routes through Fort Myers Shores, Buckingham, Olga, Gateway, and Tice, so we’re already in your area most weeks. If you’re east of the river or across the bridge toward Tice, call the same number and we’ll get you on the schedule.
Serving Fort Myers Shores, FL — Our Local Coverage Area
We’re based in the Fort Myers Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fort Myers Shores
Water is getting into the operator housing or the wiring splice underground, causing a ground fault. On canal-front lots, the combination of high humidity and the occasional high water table after a storm means older splice boxes and conduit fittings can leak. We trace the circuit, find the water entry point, replace the affected wiring or board, and seal the housing properly so it doesn’t happen again next storm. Call (844) 791-3898 to schedule a diagnostic.
Yes, we service and repair solar gate openers all along Palm Beach Boulevard and the acreage roads off it. We check panel output, battery condition, and charge controller settings, then match the panel and battery to how many times your gate cycles each day. An undersized panel is the most common problem, especially after a stretch of cloudy weather leaves the battery drained. We size it right so the gate works year-round, not just in sunny spells.
On wider gates, especially ornamental steel or aluminum panels, the real problem is often the hinge post below ground. If the post is original galvanized steel from the 1970s or 1980s, it may have rusted thin inside the concrete footing. You can adjust the hinges all day; the post will keep flexing. We cut out the old post, set a new one, and correct the gate sag before reattaching the operator. That’s the repair that holds.
Yes, that’s a safety failure. The reversing sensor, usually a photocell or a safety edge, has stopped sending the obstruction signal to the control board. The gate will keep pressing until the motor overloads or something breaks. We replace the failed sensor and test the obstruction reverse function several times before we leave. If you’re in Fort Myers Shores and your gate isn’t reversing, call us as soon as you can.
Yes, we service LiftMaster and FAAC operators across the entire 33905 ZIP code, from the riverfront streets down to the inland acreage. We carry parts for both brands and we’re trained on their residential and light-commercial boards, motors, and remotes. Whether it’s a LiftMaster arm that’s binding or a FAAC board that’s not sending the close signal, we’ll diagnose and repair it on site.
Written by Noel Braddock, Owner at Courtyard Gate Repair, serving Fort Myers Shores and the 33905 ZIP code.