Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lake Placid, FL
Gate installation in Lake Placid is not a one-size-fits-all job. Most properties here sit on wide lots along US-27, around the lakefront, or deep in ranch country, which means driveway gates are wider, heavier, and often solar-powered. Sandy soil, summer downpours, and older manufactured homes and ranch properties add another layer of complication. Courtyard Gate Repair handles gate installation, repair, and electric gate work across Lake Placid, FL, with a team that knows the difference between a suburban pedestrian gate and a 16-foot farm gate on posts set in fast-draining sand. Call (844) 791-3898 for an estimate on any gate project in the 33852 or 33862 ZIP codes.
Why Lake Placid Homes Are Different
Lake Placid’s gate work follows the land. Long gravel and dirt driveways off State Route 70 and around Lake June, Lake Placid, and Lake Istokpoga call for wide agricultural or ornamental gates. Many of those gates hang on posts that were set directly into sandy soil years ago, often without concrete. A heavy summer storm can wash out the fill around a post and throw the gate off its swing in a single afternoon. We see this pattern regularly on older single-family homes and manufactured properties, where rusted hinges and sagging gate frames are as common as failed opener boards.
The humid subtropical climate does steady damage, too. Moisture gets into powder-coated steel at the weld points first, then works outward. Lightning strikes during afternoon thunderstorms take out control boards and photo-eye sensors on automated systems, even when the gate itself still looks fine. Lake Placid jobs are rarely simple hinge replacements. They usually involve resetting a post with proper drainage, realigning the gate, and then diagnosing whatever electrical issue the storm left behind. That combination is exactly what our Lake Placid gate service work is built around.
Styles & brands we work with





Our Main Lake Placid Services
Two services account for most of the calls we get from Lake Placid homeowners and property managers: mechanical repair on gates that will not swing or slide, and electrical repair on automated systems that stopped responding.
Gate Repair in Lake Placid
Sagging gates, rusted hinges, posts that have shifted in sandy soil, latch and lock failures: these are the everyday problems on Lake Placid’s older ranch properties and manufactured homes. A gate that drags on the ground near the latch post usually has a settled post, not a bent hinge, and that changes how the repair should be done. We reset posts with drainage so the fix holds through the next rainy season rather than washing out again. For mechanical gate failures around Lake Placid, see Gate Repair in Lake Placid.

Electric Gate Repair in Lake Placid
Automated gates around Lake Placid fail in predictable ways: lightning-fried boards, solar panels that stopped charging the battery, broken limit switches, and safety sensors knocked out of alignment. The rural lots around US-27 mean many systems run on solar openers, which adds charge-controller and battery diagnostics to the job. We work on LiftMaster, FAAC, BFT, DoorKing, Mighty Mule, and other brands without pushing a replacement unless the old system truly cannot be saved. For an opener that will not respond, see Electric Gate Repair in Lake Placid.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lake Placid

A new gate in Lake Placid has to be built for sand, storms, and the actual width of your driveway, not whatever the big-box store had in stock. We measure the opening, check the soil and drainage, and spec a gate and opener that will hold up on a rural lot off US-27 without needing a service call every spring. New installation in Lake Placid often means wide aluminum or steel driveway gates on concrete-set posts, paired with a solar-capable operator when running line voltage to the gate would mean trenching hundreds of feet. You can see the full scope of our installation work on the Gate Installation page.
Driveway Gate Installation
Signs you need it
If your current gate sags past the midpoint, scrapes the ground, or no longer closes far enough to latch, and the posts themselves have sunk or cracked in Lake Placid’s sandy soil, replacement usually costs less in the long run than repeated patch jobs.
What it costs in Lake Placid
A driveway gate installation in Lake Placid typically runs $1,500 – $4,500 for a manual single-swing gate, depending on width, material, and whether the existing posts can be reused.
How we do it
We pull the old gate and hardware, dig and pour concrete footings sized for the gate’s weight and the sand’s drainage rate, set the posts, hang the new gate, and adjust the hinges and latch so the gate swings clean with no drag.
Automatic Gate Installation
Signs you need it
If you are opening and closing your gate by hand fifty times a week, or your old operator has been repaired twice and failed again, an automated system built for Lake Placid’s storm exposure may be the better investment than another board swap.
What it costs in Lake Placid
An automatic gate installation in the 33852 or 33862 ZIP codes typically runs $3,500 – $8,000, including the operator, safety sensors, and the electrical or solar power setup.
How we do it
We mount the operator on a reinforced pad or post, run power or install the solar array and battery, align the photo-eyes and safety edges, set the open and close limits, and program the remotes and keypad so the system works on day one.
Sliding Gate Installation
Signs you need it
If your driveway slopes sharply down toward the road, or you have a narrow frontage where a swing gate would block traffic while opening, a sliding gate on a track or cantilever setup usually fits the lot better.
What it costs in Lake Placid
A sliding gate installation in Lake Placid typically runs $2,500 – $6,500, with cantilever hardware on the higher end because it requires a heavier frame and more concrete.
How we do it
We set the track or cantilever posts in concrete below the washout line, hang the gate, set the roller heights so the gate travels level, and install the opener and limits for a consistent full-open and full-close every cycle.
What Gate Installation Costs in Lake Placid
| Item | Typical range in Lake Placid |
|---|---|
| Manual driveway gate (single, standard width) | $1,500 – $4,500 |
| Automatic gate with operator and safety sensors | $3,500 – $8,000 |
| Sliding gate on track or cantilever | $2,500 – $6,500 |
Does a new gate in Lake Placid need a permit?
Most residential driveway gates in unincorporated Highlands County do not require a building permit, but HOA-governed communities around Lake Placid often have their own rules about gate height, material, and color. We confirm the local requirements before the first post hole is dug.
How long does gate installation take around Lake Placid?
A manual gate install is usually done in a day. An automatic system, especially one needing a solar array or a long power run, typically takes one to two days including programming and safety testing. Call (844) 791-3898 for a project-specific timeline.
Brands We Service in Lake Placid
Courtyard Gate Repair technicians are trained on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others. We stock common boards, sensors, remotes, and hinge hardware for these brands and can usually turn around a Lake Placid repair without waiting on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lake Placid, FL
| Service | Typical range in Lake Placid |
|---|---|
| Gate repair: hinge and alignment fix | $150 – $450 |
| Gate repair: post reset with concrete | $300 – $800 |
| Electric gate repair: board replacement | $250 – $700 |
| Electric gate repair: motor replacement | $400 – $1,200 |
| Electric gate repair: sensor realignment or replacement | $100 – $350 |
| Electric gate repair: solar panel and battery service | $200 – $600 |
| Gate installation: manual driveway gate | $1,500 – $4,500 |
| Gate installation: automatic system | $3,500 – $8,000 |
| Gate installation: sliding gate | $2,500 – $6,500 |
Prices in Lake Placid run higher when the job involves resetting posts that have washed out in sandy soil or running power a long way from the house to a rural gate. Whatever the number, it is quoted and agreed before we start, so the invoice will not surprise you.
Neighborhoods We Serve in Lake Placid
We work throughout Lake Placid and the surrounding rural areas, from lakefront streets to ranch roads well outside town.
- Lake June Pointe
- Placid Lakes
- Sylvan Shores
- Lake Istokpoga area
- Properties along US-27 and State Route 70
Most Lake Placid jobs can be scheduled within a few business days, and we keep our route through Highlands County planned so a return trip for follow-up is quick.
Service Area – Cities Near Lake Placid
Beyond Lake Placid, our gate technicians regularly work in Sebring, FL and Avon Park, FL to the north, as well as Zolfo Springs, FL and Okeechobee, FL across the surrounding ranch country. If your property sits between towns or a few miles down a county road, call us and we will figure out the fastest day to get a truck to you.
Serving Lake Placid, FL — Our Local Coverage Area
We’re based in the Lake Placid area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Placid
Most Lake Placid repair calls are scheduled within two to four business days, with emergency service available for gates that will not close and are leaving a property unsecured. Call (844) 791-3898 and we will tell you the soonest open slot for your specific ZIP code.
Many lakefront and planned communities around Lake Placid have architectural guidelines covering gate style, height, and color. We work within those rules and can help you pick a gate that satisfies the HOA without sacrificing strength on a wide rural driveway.
Yes. Most of our Lake Placid work is actually on unincorporated ranch and acreage properties in the 33852 and 33862 ZIP codes. We carry the hardware for wide agricultural gates and solar opener systems so a property ten miles from town gets the same service as one on a lakefront street.
If your gate is sagging, stuck, or completely dead, call Courtyard Gate Repair at (844) 791-3898 for a free estimate. We serve Lake Placid with gate-only expertise, from manual hinge rebuilds to full automatic installations.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Placid Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Rachel Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Diego Rodriguez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Grace Kim